How to replace the outer CV Boot and CV Joint on the wheel drive shaft on 2008 Chevrolet Impala?

When replacing a wheel drive shaft outer joint with boot start by getting these essential tools: Two types of tools needed for the repair are Drive Axle Seal Clamp Pliers (J 35910) and Wheel Drive Shaft Boot Clamp Pliers (CH-48894). Drive Axle Seal Clamp Pliers (J 35910) and Wheel Drive Shaft Boot Clamp Pliers (CH-48894). Set the drive axle shaft in a soft-jawed vice clamp while being mindful to avoid cutting through the inboard boot so the constant velocity joint remains free from premature wear. The flat-bladed tool removes the boot clamp from both the constant velocity (CV) joint and the boot so side cutters can detach the clamps from the boot and wheel drive shaft. The process requires replacement of boot clamps with new ones during installation. Lay the new boot directly on the wheel drive shaft while making sure it fits correctly into the groove. Split the grease from the service kit between packing the outboard boot while also packing the CV joint. The CV joint installation requires a block of wood and hammer while attaching boot clamps to the boot and CV joint housing. Use the boot clamp crimping tool to measure the clamp end gap and ensure it stays below 2.15 mm (0.85 in). Use Wheel Drive Shaft Boot Clamp Pliers (CH-48894) to tightly secure boot clamps after completing the bench vise removal of the wheel drive shaft. To properly greased the outer CV joint you should perform circular movements of the rotation four to five times before assembling the wheel drive shaft.

OEM 2008 Chevrolet Impala CV Boot

Axle Boot

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 CV Boots found

View related parts
2008 Chevrolet Impala Outer CV Joint Boot, Front Part Number: 19178957
$90.46 MSRP: $155.36
You Save: $64.90 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Front Axle; CV Boot; Outer Boot; Inner Boot Kit; Boots; Boot Kit, Front Wheel Drive Axle Shaft
- Position: Front
- Replaces: 19150654, 15855656
- Item Weight: 1.50 Pounds
- Item Dimensions: 9.8 x 9.5 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19178957
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- SS | 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Inner Boot, Front Part Number: 19259374
$17.80 MSRP: $43.45
You Save: $25.65 (60%)
ADD TO CART
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Boot; Outer Boot Kit
- Position: Front
- Item Weight: 1.20 Pounds
- Item Dimensions: 6.7 x 6.2 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19259374
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Impala Boot Kit, Front Part Number: 15269918
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Boot; Outer CV Joint Boot; Outer Boot; Inner Boot Kit; Boots; Boot Kit, Front Axle
- Position: Front
- Replaces: 89047671
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.4 x 6.1 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15269918
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, LS, LT, LTZ, Police | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Impala Boot Kit, Front Part Number: 26073372
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Boot; Inner Boot; Inner Boot Kit; Boots
- Position: Front
- Item Weight: 0.80 Pounds
- Item Dimensions: 7.7 x 6.9 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26073372
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Impala Boot Kit, Front Part Number: 26044383
Product Specifications
- Other Name: Boot Kit, Front Axle; CV Boot; Outer CV Joint Boot; Outer Boot; Outer Boot Kit; Boots; Boot Kit, Front Wheel Drive Axle Shaft
- Position: Front
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.6 x 6.2 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 26044383
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Impala Outer CV Joint Part Number: 88965619
Product Specifications
- Other Name: Boot Kit, Front Wheel Drive Axle Shaft; CV Joint; CV Boot; Inner Boot; Outer Boot Kit; Boots
- Position: Front
- Item Weight: 1.50 Pounds
- Item Dimensions: 8.7 x 8.6 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88965619
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- SS | 8 Cyl 5.3 L GAS

2008 Chevrolet Impala CV Boot

With a comprehensive array of OEM 2008 Chevrolet Impala CV Boot, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Impala CV Boot are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Impala CV Boot Parts and Q&A

Q: How to replace the outer CV Boot and CV Joint on the wheel drive shaft on 2008 Chevrolet Impala?
A: When replacing a wheel drive shaft outer joint with boot start by getting these essential tools: Two types of tools needed for the repair are Drive Axle Seal Clamp Pliers (J 35910) and Wheel Drive Shaft Boot Clamp Pliers (CH-48894). Drive Axle Seal Clamp Pliers (J 35910) and Wheel Drive Shaft Boot Clamp Pliers (CH-48894). Set the drive axle shaft in a soft-jawed vice clamp while being mindful to avoid cutting through the inboard boot so the constant velocity joint remains free from premature wear. The flat-bladed tool removes the boot clamp from both the constant velocity (CV) joint and the boot so side cutters can detach the clamps from the boot and wheel drive shaft. The process requires replacement of boot clamps with new ones during installation. Lay the new boot directly on the wheel drive shaft while making sure it fits correctly into the groove. Split the grease from the service kit between packing the outboard boot while also packing the CV joint. The CV joint installation requires a block of wood and hammer while attaching boot clamps to the boot and CV joint housing. Use the boot clamp crimping tool to measure the clamp end gap and ensure it stays below 2.15 mm (0.85 in). Use Wheel Drive Shaft Boot Clamp Pliers (CH-48894) to tightly secure boot clamps after completing the bench vise removal of the wheel drive shaft. To properly greased the outer CV joint you should perform circular movements of the rotation four to five times before assembling the wheel drive shaft.