How to replace the steering knuckle on 2008 Chevrolet Impala?

The first step to replace the Steering Knuckle involves properly raising and supporting the vehicle. First remove the bearing/hub assembly that belongs to the Wheel Bearing/service and repair/front suspension system before taking out the front lower control arm ball stud from control arm/service and repair system. In the next step remove the external Tie Rod End from the Steering Knuckle through the (Steering/Tie Rod/Tie Rod End/Service and Repair) procedure. First draw a scribe mark between the strut and knuckle before removing both bolts and nuts so you can later remove the knuckle from the vehicle. To reinstall the knuckle place it back on the car while keeping to the instructions provided on the fastener notice. Both strut bolts need to be tightened with 130 n.m (96 lb ft) torque until reaching proper specifications. Secure the Steering Knuckle's outer tie rod (Steering/Tie Rod/Tie Rod End/Service and Repair) while also fastening the front lower control arm ball stud to the knuckle (Control Arm/Service and Repair). After installing the front wheel drive shaft bearing (Wheel Bearing/Service and Repair/Front Suspension) lower the vehicle for inspection to check the front wheel alignment (Alignment/Service and Repair/Wheel Alignment Measurement) while making adjustments if required.

OEM 2008 Chevrolet Impala Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Steering Knuckles found

View related parts
2008 Chevrolet Impala Knuckle, Driver Side
Part Number: 23130696
$388.19 MSRP: $639.48
You Save: $251.29 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Driver Side
- Replaces: 19151396, 18022046, 25816705, 18060616
- Item Weight: 4.50 Pounds
- Item Dimensions: 13.4 x 11.1 x 5.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23130696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Knuckle, Driver Side
Part Number: 23127629
$268.88 MSRP: $442.93
You Save: $174.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Knuckle, Passenger Side
Part Number: 22990753
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.4 x 13.1 x 12.6 inches
- Condition: New
- SKU: 22990753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Knuckle, Passenger Side
Part Number: 23130695
$433.92 MSRP: $623.98
You Save: $190.06 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Passenger Side
- Replaces: 19151397, 18022047, 18060617, 25816704
- Item Weight: 4.10 Pounds
- Item Dimensions: 14.0 x 10.6 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23130695
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Knuckle, Passenger Side
Part Number: 23127630
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 18060639, 22990753, 25816683, 10434255, 18021361, 18060681, 20899801, 88955419, 18060653
- Item Weight: 5.40 Pounds
- Item Dimensions: 5.5 x 13.4 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
2008 Chevrolet Impala Knuckle, Driver Side
Part Number: 25816686
$19.97 MSRP: $32.89
You Save: $12.92 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 18023734, 18061054
- Item Weight: 10.90 Pounds
- Item Dimensions: 11.4 x 9.7 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25816686
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Impala Knuckle, Passenger Side
Part Number: 25816685
$146.70 MSRP: $240.12
You Save: $93.42 (39%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 18023735, 18061055
- Item Weight: 10.50 Pounds
- Item Dimensions: 14.8 x 10.3 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25816685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Impala Submodels:
- Base, LS, LS Sport, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Impala Steering Knuckle

With a comprehensive array of OEM 2008 Chevrolet Impala Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Impala Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Impala Parts Questions & Experts Answers

Q: How to replace the steering knuckle on 2008 Chevrolet Impala?
A: The first step to replace the Steering Knuckle involves properly raising and supporting the vehicle. First remove the bearing/hub assembly that belongs to the Wheel Bearing/service and repair/front suspension system before taking out the front lower control arm ball stud from control arm/service and repair system. In the next step remove the external Tie Rod End from the Steering Knuckle through the (Steering/Tie Rod/Tie Rod End/Service and Repair) procedure. First draw a scribe mark between the strut and knuckle before removing both bolts and nuts so you can later remove the knuckle from the vehicle. To reinstall the knuckle place it back on the car while keeping to the instructions provided on the fastener notice. Both strut bolts need to be tightened with 130 n.m (96 lb ft) torque until reaching proper specifications. Secure the Steering Knuckle's outer tie rod (Steering/Tie Rod/Tie Rod End/Service and Repair) while also fastening the front lower control arm ball stud to the knuckle (Control Arm/Service and Repair). After installing the front wheel drive shaft bearing (Wheel Bearing/Service and Repair/Front Suspension) lower the vehicle for inspection to check the front wheel alignment (Alignment/Service and Repair/Wheel Alignment Measurement) while making adjustments if required.