OEM 2008 Chevrolet Malibu Steering Column

2008 Chevrolet Malibu Steering Column Parts Questions & Experts Answers

• Q: How should the steering column be inspected and repaired after a collision on 2008 Chevrolet Malibu?

  A: Damage inspection of the Steering Column is essential after an accident because the column becomes highly prone to failure once extraction from the vehicle starts. The end-of-shaft and column assembly should be avoided for dropping and hammering because these actions can lead to collapse of the Steering Shaft or weaken the plastic components that keep the column rigid. Begin by installing a scan tool followed by enabling the ignition with the engine engine powered off. Set the wheel at center position so no unbalanced forces affect the steering components. Check the Steering Shaft torque data parameter shown on the scan tool because it must remain within a valid range of -1 n.m to +1 n.m (-0.7 lb ft to +0.7 lb ft). The Steering Column assembly needs replacement when the torque measurement goes beyond its valid range. Examine the coil wire for evidence of heat-related damage which includes scorch marks and melting or other types of damage so replace the coil wire if required. A free suspension of the inflatable restraint coil assembly from the Steering Column comes before rotating the shaft since free suspension prevents damage. A visual examination of the Steering Shaft should be conducted to check for sheared plastic. Installation of a new Steering Column becomes necessary if the inspection discovers plastic shearing. Cars which experience single-car accidents or ones that suffer major damage to their frames or have deployed inflatable restraint devices often wind up with steering columns that need replacement. Begin the replacement process by using the necessary procedures for either electronic power steering or hydraulic power steering Steering Column installation based on your requirements.