How to replace the Lash Adjusters on 2008 Chevrolet Silverado 1500?

The replacement process begins by taking out the Intake Manifold and pushrods before placing everything in a rack to maintain proper reinstallation. You should first remove the bolts with the lifter pushrod guide and then place valve lifters in an upright rack to prevent oil loss. The valve lifter remover (J 3049-A) must be used to break the grips of lifters that have become stuck from gum or varnish deposits. Before engine block replacement check valve lifter bores with cleaning solvent and shop towels for signs of wear or scoring. It is essential to inspect and clean the Camshaft for wear and damage. At the same time, check and clean the lifters if needed. New lifters require lubrication forrollers before installation. When using existing lifters reinstall them exactly where they were before. Place the lifters first before placing the lifter pushrod guides and tightening all bolts to 12 lb ft torque then add pushrods and lastly put on the Intake Manifold.

OEM 2008 Chevrolet Silverado 1500 Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Lash Adjusters found

View related parts
2008 Chevrolet Silverado 1500 Valve Lifters
Part Number: 17122490
$35.25 MSRP: $60.54
You Save: $25.29 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lifter, Engine Valve Lifter; Valve Lifter
- Replaces: 05234670, 5234670
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.0 x 3.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 17122490
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Base, Hybrid, LS, LT, LTZ, WT, XFE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
2008 Chevrolet Silverado 1500 Valve Lifters
Part Number: 12698946
$46.83 MSRP: $81.88
You Save: $35.05 (43%)
ADD TO CART
Product Specifications
- Other Name: Lifter Assembly-Valve (Afm); Lifter, Engine Valve Lifter
- Replaced by: 12740071
- Replaces: 12639516, 12680871, 12571595, 12632143, 12619820, 12645725, 12569256
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.2 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12698946
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Silverado 1500 Submodels:
- Custom, Custom Trail Boss, High Country, Hybrid, LS, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, XFE, ZR2 | 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2008 Chevrolet Silverado 1500 Lash Adjuster

With a comprehensive array of OEM 2008 Chevrolet Silverado 1500 Lash Adjuster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Silverado 1500 Lash Adjuster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Silverado 1500 Lash Adjuster Parts Questions & Experts Answers

Q: How to replace the Lash Adjusters on 2008 Chevrolet Silverado 1500?
A: The replacement process begins by taking out the Intake Manifold and pushrods before placing everything in a rack to maintain proper reinstallation. You should first remove the bolts with the lifter pushrod guide and then place valve lifters in an upright rack to prevent oil loss. The valve lifter remover (J 3049-A) must be used to break the grips of lifters that have become stuck from gum or varnish deposits. Before engine block replacement check valve lifter bores with cleaning solvent and shop towels for signs of wear or scoring. It is essential to inspect and clean the Camshaft for wear and damage. At the same time, check and clean the lifters if needed. New lifters require lubrication forrollers before installation. When using existing lifters reinstall them exactly where they were before. Place the lifters first before placing the lifter pushrod guides and tightening all bolts to 12 lb ft torque then add pushrods and lastly put on the Intake Manifold.