How to replace the front wheel bearing, hub, and seal on a 4WD on 2008 Chevrolet Trailblazer?

A 4wd vehicle requires you to take off the tire and wheel center cap followed by the drive axle nut to access the front wheel components. Rise the vehicle with a support stand and detach the tire and wheel assembly. Remove the brake rotor before moving ahead. Use the hammer and brass drift to hit against the wheel drive shaft end yet keep its connection with the Wheel Hub and bearing. Unscrew and withdraw the ABS Sensor mounting bolt and ABS Sensor from their position in the Wheel Hub and bearing. Afterward detach the Wheel Hub and bearing by unscrewing its bolts then remove it from the Steering Knuckle before taking off the splash shield. Onset starts by mounting the splash shield to the Steering Knuckle and activating it onto the threaded slots. Insert the Wheel Hub and bearing onto the Steering Knuckle with precise threaded placement then tighten its mounting bolts to 105 n.m (77 lb ft). Afterward attach the ABS Sensor to its base and fasten the mounting bolt at 18 n.m (13 lb ft). Set back the brake rotor and add the wheel and tire before lowering the vehicle. Twist the drive axle nut until it reaches 140 n.m (103 lb ft) and put back the wheel center cap.

OEM 2008 Chevrolet Trailblazer Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Wheel Bearings found

View related parts
2008 Chevrolet Trailblazer Axle Bearings, Front
Part Number: 26053326
$11.23 MSRP: $20.06
You Save: $8.83 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Wheel Bearing; Axle Bearing; Output Shaft Bearing; Bearing; Bearings; Bearing, Front Wheel Drive Axle Shaft
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.5 x 2.5 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26053326
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2008 Chevrolet Trailblazer Wheel Bearing, Rear
Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.4 x 3.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 12479031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2008 Chevrolet Trailblazer Hub & Bearing, Front
Part Number: 19259798
$240.21 MSRP: $466.20
You Save: $225.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 12413037, 15130858
- Item Weight: 9.80 Pounds
- Item Dimensions: 7.0 x 6.6 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19259798
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2008 Chevrolet Trailblazer Bearing, Front
Part Number: 15884291
Product Specifications
- Other Name: Bearing Assembly-Front Wheel Drive Intermediate Shaft; Axle Bearing; Bearing, Front Axle
- Position: Front
- Replaces: 15030024, 15166774, 15200680
- Item Weight: 5.60 Pounds
- Item Dimensions: 11.2 x 10.8 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15884291
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
2008 Chevrolet Trailblazer Bearing, Front
Part Number: 15884292
Product Specifications
- Other Name: Bearing, Front Wheel Drive Intermediate Shaft; Axle Bearing; Bearing, Front Axle
- Position: Front
- Replaces: 15030023, 15200681, 15166773, 15054996
- Item Weight: 7.70 Pounds
- Item Dimensions: 11.3 x 10.4 x 8.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15884292
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Trailblazer Submodels:
- Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

2008 Chevrolet Trailblazer Wheel Bearing

With a comprehensive array of OEM 2008 Chevrolet Trailblazer Wheel Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Trailblazer Wheel Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Trailblazer Parts Questions & Experts Answers

Q: How to replace the front wheel bearing, hub, and seal on a 4WD on 2008 Chevrolet Trailblazer?
A: A 4wd vehicle requires you to take off the tire and wheel center cap followed by the drive axle nut to access the front wheel components. Rise the vehicle with a support stand and detach the tire and wheel assembly. Remove the brake rotor before moving ahead. Use the hammer and brass drift to hit against the wheel drive shaft end yet keep its connection with the Wheel Hub and bearing. Unscrew and withdraw the ABS Sensor mounting bolt and ABS Sensor from their position in the Wheel Hub and bearing. Afterward detach the Wheel Hub and bearing by unscrewing its bolts then remove it from the Steering Knuckle before taking off the splash shield. Onset starts by mounting the splash shield to the Steering Knuckle and activating it onto the threaded slots. Insert the Wheel Hub and bearing onto the Steering Knuckle with precise threaded placement then tighten its mounting bolts to 105 n.m (77 lb ft). Afterward attach the ABS Sensor to its base and fasten the mounting bolt at 18 n.m (13 lb ft). Set back the brake rotor and add the wheel and tire before lowering the vehicle. Twist the drive axle nut until it reaches 140 n.m (103 lb ft) and put back the wheel center cap.