How to replace the front wheel bearing on Chevrolet Trailblazer?

Start replacement by first taking off the tire and wheel center cap then the drive axle nut. Lift your vehicle by supports and take off the tire wheel and brake rotor jointly. Hit the outer end of the wheel drive shaft with a brass drift to separate it from the Wheel Hub before handling the Wheel Bearing completely. First take out the ABS Sensor bolt and detach the ABS Sensor from its Wheel Hub bearing location. Unscrew all mounting bolts to pull out the Wheel Hub and bearing from their position on the Steering Knuckle. Afterward, take away the splash shield attached to that same piece. Begin installation by putting the splash shield onto the Steering Knuckle and placing its threaded holes directly above their positions. Position the Wheel Hub and bearing at the Steering Knuckle properly then fasten the bolts with 105 nm (77 ft. Lbs.) of torque. Install the ABS Sensor before adding its mounting bolt then torque it at 18 nm (13 ft. Lbs.). Install the tire and wheel units back onto the brake rotor before lowering the vehicle. End the process by putting the drive axle nut on first then tightening it to 140 nm before adding the tire and wheel center cap.

OEM Chevrolet Trailblazer Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wheel Bearings found

View related parts
Chevrolet Trailblazer Wheel Bearing, Rear
Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Axle Bearings, Front
Part Number: 26053326
$11.23 MSRP: $20.06
You Save: $8.83 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Wheel Bearing; Axle Bearing; Output Shaft Bearing; Bearing; Bearings; Bearing, Front Wheel Drive Axle Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Hub Assembly, Front
Part Number: 13546938
$84.10 MSRP: $164.66
You Save: $80.56 (49%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub & Bearing; Rear Hub & Bearing; Hub & Bearing; Hub & Bearing Assembly
- Position: Front
- Replaces: 13500572, 13507016, 13502829, 13590795, 13580686, 13585466, 13526966, 13583479
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Trailblazer | ACTIV, L, LS, LT, RS | 3 Cyl 1.2 L GAS, 3 Cyl 1.3 L GAS
View related parts
Chevrolet Trailblazer Hub & Bearing, Front
Part Number: 19259798
$240.21 MSRP: $466.20
You Save: $225.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub; Hub, Front Wheel
- Position: Front
- Replaces: 12413037, 15130858
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Bearing, Front
Part Number: 15884292
Product Specifications
- Other Name: Bearing, Front Wheel Drive Intermediate Shaft; Axle Bearing; Bearing, Front Axle
- Position: Front
- Replaces: 15030023, 15200681, 15166773, 15054996
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet Trailblazer Bearing, Front
Part Number: 15884291
Product Specifications
- Other Name: Bearing Assembly-Front Wheel Drive Intermediate Shaft; Axle Bearing; Bearing, Front Axle
- Position: Front
- Replaces: 15030024, 15166774, 15200680
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2009 Chevrolet Trailblazer | Base, LS, LT, LTZ, North Face, SS | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet Trailblazer Wheel Bearing

Our website offers an extensive catalog of genuine Chevrolet Trailblazer Wheel Bearing at unbeatable prices. Every OEM Chevrolet Trailblazer Wheel Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Trailblazer Wheel Bearing Parts Questions & Experts Answers

Axle Bearings, Front
26053326
Q: How to replace the front wheel bearing on Chevrolet Trailblazer?
A: Start replacement by first taking off the tire and wheel center cap then the drive axle nut. Lift your vehicle by supports and take off the tire wheel and brake rotor jointly. Hit the outer end of the wheel drive shaft with a brass drift to separate it from the Wheel Hub before handling the Wheel Bearing completely. First take out the ABS Sensor bolt and detach the ABS Sensor from its Wheel Hub bearing location. Unscrew all mounting bolts to pull out the Wheel Hub and bearing from their position on the Steering Knuckle. Afterward, take away the splash shield attached to that same piece. Begin installation by putting the splash shield onto the Steering Knuckle and placing its threaded holes directly above their positions. Position the Wheel Hub and bearing at the Steering Knuckle properly then fasten the bolts with 105 nm (77 ft. Lbs.) of torque. Install the ABS Sensor before adding its mounting bolt then torque it at 18 nm (13 ft. Lbs.). Install the tire and wheel units back onto the brake rotor before lowering the vehicle. End the process by putting the drive axle nut on first then tightening it to 140 nm before adding the tire and wheel center cap.