How to replace the brake master cylinder on 2008 Chevrolet Uplander?

In order to replace the brake master cylinder, unscrew the electrical connector and brake pipes and seal the open ends. Take out the master cylinder, emptying the brake fluid. Put it into a bench bleed and mount and tighten the mounting nuts. Install the brake pipes and electrical connector and bleed the hydraulic brake.

OEM 2008 Chevrolet Uplander Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Master Cylinders found

View related parts
2008 Chevrolet Uplander Master Cylinder Part Number: 18022002
Product Specifications
- Other Name: Cylinder Kit, Brake Master; Overhaul Kit; Master Cylinder Repair Kit
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.1 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18022002
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Master Cylinder Part Number: 19209193
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 15189238
- Item Weight: 1.90 Pounds
- Item Dimensions: 9.8 x 7.4 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209193
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Brake Master Cylinder

With a comprehensive array of OEM 2008 Chevrolet Uplander Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Brake Master Cylinder Parts and Q&A

Q: How to replace the brake master cylinder on 2008 Chevrolet Uplander?
A: In order to replace the brake master cylinder, unscrew the electrical connector and brake pipes and seal the open ends. Take out the master cylinder, emptying the brake fluid. Put it into a bench bleed and mount and tighten the mounting nuts. Install the brake pipes and electrical connector and bleed the hydraulic brake.