How to replace the front side door striker on 2008 Chevrolet Uplander?

The first step to replace the front side door lock striker starts with opening the front door where you must sketch out the existing front door lock striker position on the B-pillar using a grease pencil. The sequence starts by unscrewing front door lock striker screws until you can remove the front door lock striker plate together with its accompanying shim from the B-pillar. You should put the front door lock striker plate and shim into place at the B-pillar location marked with pencil grease and fasten the front door lock striker screws to 25 N.m (18 lb ft) torque. The adjustment step requires the front door lock striker to connect correctly to the front door lock before the installation of the door within the frame while using the striker to maintain the door at a level position free from elevation or lowering attempts. Finally, close the front door.

OEM 2008 Chevrolet Uplander Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Door Strikers found

View related parts
2008 Chevrolet Uplander Striker
Part Number: 86785938
$5.15 MSRP: $7.67
You Save: $2.52 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Striker Assembly-Front Side Door Latch *Bright; Striker, Door Lock Striker
- Replaces: 22721425
- Condition: New
- SKU: 86785938
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Striker
Part Number: 10352584
Product Specifications
- Other Name: Striker, Rear Compartment Lid Lock Or Liftgate; Striker, End Gate Lock
- Replaces: 10300982, 16639548, 16638680
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.4 x 2.7 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10352584
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Uplander Striker, Rear
Part Number: 10353637
Product Specifications
- Other Name: Striker Assembly-Rear Side Door Lock; Striker, Door Lock Striker
- Position: Rear
- Replaces: 10233960
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.7 x 3.7 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10353637
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
- Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2008 Chevrolet Uplander Door Striker

With a comprehensive array of OEM 2008 Chevrolet Uplander Door Striker, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Door Striker are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Uplander Door Striker Parts Questions & Experts Answers

Q: How to replace the front side door striker on 2008 Chevrolet Uplander?
A: The first step to replace the front side door lock striker starts with opening the front door where you must sketch out the existing front door lock striker position on the B-pillar using a grease pencil. The sequence starts by unscrewing front door lock striker screws until you can remove the front door lock striker plate together with its accompanying shim from the B-pillar. You should put the front door lock striker plate and shim into place at the B-pillar location marked with pencil grease and fasten the front door lock striker screws to 25 N.m (18 lb ft) torque. The adjustment step requires the front door lock striker to connect correctly to the front door lock before the installation of the door within the frame while using the striker to maintain the door at a level position free from elevation or lowering attempts. Finally, close the front door.