How to replace the front Ride Height Sensor on 2009 Cadillac DTS?

The first step to replace the Electronic Suspension Front Position Sensor involves drifting the automobile and removing its wheel. First disconnect the height sensor connector along with the sensor link from the ball stud. Next unscrew the sensor mounting nut and take out the sensor from the vehicle. You should put the sensor mounting stud head into the key hole before tightening the sensor mounting nut to 9 Nm (80 lb in). Reinstall the wheel while performing the following steps: reconnect the sensor link on the ball stud and the height sensor connector then bring down the vehicle.

OEM 2009 Cadillac DTS Ride Height Sensor

Suspension Level Hight Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Ride Height Sensors found

View related parts
2009 Cadillac DTS Control Sensor
Part Number: 25767350
Product Specifications
- Other Name: Sensor Assembly-Auto Level Control; Front Sensor; Sensor, Air Suspension Leveling Or Level Control
- Item Weight: 4.30 Pounds
- Item Dimensions: 8.8 x 5.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25767350
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac DTS Rear Sensor, Passenger Side
Part Number: 25767364
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Rear Position; Suspension Ride Height Sensor; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Passenger Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 5.9 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25767364
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac DTS Front Sensor, Driver Side
Part Number: 25767360
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Front Position; Suspension Ride Height Sensor; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Front Driver Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.4 x 5.8 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25767360
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac DTS Rear Sensor, Driver Side
Part Number: 25767365
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Rear Position; Suspension Ride Height Sensor; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Driver Side
- Item Weight: 0.90 Pounds
- Item Dimensions: 5.9 x 4.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25767365
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac DTS Rear Sensor, Passenger Side
Part Number: 15241856
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Rear Position; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Passenger Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.6 x 3.6 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15241856
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac DTS Rear Sensor, Driver Side
Part Number: 15241855
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Rear Position; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Rear Driver Side
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.6 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15241855
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac DTS Front Sensor, Passenger Side
Part Number: 25767359
$195.39 MSRP: $350.49
You Save: $155.10 (45%)
Product Specifications
- Other Name: Sensor Assembly-Electronic Suspension Front Position; Suspension Ride Height Sensor; Ride Height Sensor; Sensor, Air Suspension Leveling Or Level Control
- Position: Front Passenger Side
- Item Weight: 1.00 Pounds
- Item Dimensions: 7.5 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25767359
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2009 Cadillac DTS Ride Height Sensor

With a comprehensive array of OEM 2009 Cadillac DTS Ride Height Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac DTS Ride Height Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac DTS Parts Questions & Experts Answers

Q: How to replace the front Ride Height Sensor on 2009 Cadillac DTS?
A: The first step to replace the Electronic Suspension Front Position Sensor involves drifting the automobile and removing its wheel. First disconnect the height sensor connector along with the sensor link from the ball stud. Next unscrew the sensor mounting nut and take out the sensor from the vehicle. You should put the sensor mounting stud head into the key hole before tightening the sensor mounting nut to 9 Nm (80 lb in). Reinstall the wheel while performing the following steps: reconnect the sensor link on the ball stud and the height sensor connector then bring down the vehicle.