Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2009 Cadillac Escalade Brake Pad

Disc Brake Pad Set
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Pads found

  • 2009 Cadillac Escalade Brake Pad - 25910432
    2009 Cadillac Escalade Brake Pad Diagram - 25910432
    View related parts

    2009 Cadillac Escalade Brake Pads

    Part Number: 25910432
    $145.86 MSRP: $280.00
    You Save: $134.14 (48%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
    • Position: Front
    • Replaced by: 84233332
    • Item Weight: 4.90 Pounds
    • Item Dimensions: 8.6 x 4.1 x 3.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25910432
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2009 Cadillac Escalade Submodels:
    • Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX
  • 2009 Cadillac Escalade Brake Pad - 22742382
    2009 Cadillac Escalade Brake Pad Diagram - 22742382
    View related parts

    2009 Cadillac Escalade Brake Pads

    Part Number: 22742382
    Product Specifications
    • Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
    • Position: Front
    • Replaces: 25918342
    • Item Weight: 5.60 Pounds
    • Item Dimensions: 8.7 x 4.1 x 3.7 inches
    • Condition: New
    • SKU: 22742382
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2009 Cadillac Escalade Submodels:
    • Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX
  • 2009 Cadillac Escalade Brake Pad - 19329677
    2009 Cadillac Escalade Brake Pad Diagram - 19329677
    View related parts

    2009 Cadillac Escalade Brake Pads

    Part Number: 19329677
    Product Specifications
    • Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
    • Position: Rear
    • Replaces: 15792633, 23112025, 25949454, 15945636
    • Item Weight: 3.70 Pounds
    • Item Dimensions: 9.4 x 4.1 x 3.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 19329677
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2009 Cadillac Escalade Submodels:
    • Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2009 Cadillac Escalade Brake Pad

With a comprehensive array of OEM 2009 Cadillac Escalade Brake Pad, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac Escalade Brake Pad are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac Escalade Brake Pad Parts Questions & Experts Answers

  • Q: How to replace the front disc brake pads on the 1500 Series on 2009 Cadillac Escalade?
    A: The brake master cylinder reservoir fluid evaluation determines if pad replacement is needed. On 1500 series, begin with fluid control at the midway point. Lift the vehicle then take off its tire and wheel unit. Press the caliper pistons to their complete retraction position through two strong c-clamps put over the caliper holder and pushed against the pad's back surface. Tighten the clamps until the pistons are fully compressed. When holding the slide pin with an open end wrench tighten and remove the lower brake caliper bolt. Hold the caliper stable with wire to shield the brake hydraulic line. Set the brake caliper to the top position and keep it stable before taking off both brake pads and shims beside the mounting bracket. Clean all contact faces on the brake caliper with denatured alcohol. Rephrase the Brake Pad shims by using fresh parts or returning existing shims to their original location. Before installing the brake pads place the insulator backing free and insert them into the mounting bracket. Put the brake caliper back correctly into position. Stop tightening the guide pin bolt at 100 nm (74 lb ft) torque when you hold the guide pin in place with an open end wrench. Bolt back the wheel and tire assembly while keeping the engine off before applying the brake pedal just 2/3 of the way and releasing it. Depress the brake pedal while keeping it engaged for 30 seconds to fully install Brake Pad insulators. Before you start complete the brake fluid reservoir with fresh clean fluid until it reaches the correct level then create new surface between pads and rotors.

Related 2009 Cadillac Escalade Parts

Alternate Year Models

+
2008 Cadillac Escalade Brake Pad 2010 Cadillac Escalade Brake Pad