Make sure this part fits

GM 19329677
Brake Pads

2007-2014 GM

Customer Questions & Expert Answers (16)
GM 19329677 Brake Pads
GM 19329677 Brake Pads
  • Part Description
    Pad Kit, Brake; Disc Brake Hardware Kit
  • Position
    Rear
  • Replaces
    15792633, 23112025, 25949454, 15945636
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2007-2014 Cadillac EscaladeBase, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2014 Cadillac Escalade ESVBase, Luxury, Platinum, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Cadillac Escalade EXTBase, Luxury, Premium8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 Chevrolet AvalancheBlack Diamond LS, Black Diamond LT, Black Diamond LTZ, LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Silverado 1500Hybrid, LS, LT, LTZ, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
    2007 Chevrolet Silverado 2500 HDLT, LTZ, WT8 Cyl 6.0 L GAS
    2007-2014 Chevrolet Suburban 1500LS, LT, LTZ8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007-2013 Chevrolet Suburban 2500LS, LT, LTZ8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS
    2007-2014 Chevrolet TahoeHybrid, LS, LT, LTZ8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    2007-2013 GMC Sierra 1500Denali, Hybrid, SL, SLE, SLT, WT, XFE6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19329677 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19329677 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be applied to the caliper bracket surfaces for the 2010 Cadillac Escalade? Posted by Customer
    A:
    Apply a thin coating of high temperature silicone brake lubricant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should you do if necessary after achieving a firm pedal for the 2007 Cadillac Escalade ESV? Posted by Customer
    A:
    Fill the master cylinder reservoir to the proper level with clean brake fluid and burnish the pads and rotors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after securing the brake caliper for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Reinstall the tire and wheel assembly and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step to replace the front crossmember for the 2007 Cadillac Escalade? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if it is above the midway point, remove fluid until it reaches the midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you compress the brake caliper piston for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Use a large C-clamp over the caliper housing against the back of the outboard pad, tightening it until the piston is fully retracted.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should you do after compressing the brake caliper pistons for the 2008 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the brake caliper guide pin bolts and support the caliper with heavy mechanic wire.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you compress the brake caliper pistons for the 2009 Cadillac Escalade? Posted by Customer
    A:
    Use two large C-clamps placed over the caliper housing against the back of the outboard pad, tightening them until the pistons are fully retracted.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you compress the brake caliper piston for the 2007 Cadillac Escalade EXT? Posted by Customer
    A:
    Use a large C-clamp over the top of the caliper housing against the back of the outboard pad, tightening it until the piston is fully pushed into the caliper bore, then remove the C-clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How should the brakes be applied during the burnishing process for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Apply the brakes with moderate to firm pressure to bring the vehicle to a stop without allowing the brakes to lock.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How should the caliper be supported during the process for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Ensure the caliper is supported with heavy mechanic wire to prevent damage to the hydraulic flexible brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be done after inspecting the fluid level for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    How do you clean the pad hardware mating surfaces for the 2010 GMC Yukon? Posted by Customer
    A:
    Clean the pad hardware mating surfaces of the caliper bracket with denatured alcohol, taking care not to damage the piston dust seals.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What should be inspected before installing new components for the 2009 GMC Yukon? Posted by Customer
    A:
    Inspect the brake caliper before installing new brake pad retaining springs and the new brake pads onto the caliper bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the next step after inspecting the fluid level for the 2010 GMC Yukon? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    Q:
    What is the first step in replacing the front disc brake pads on the 2500 Series for the 2010 GMC Yukon? Posted by Customer
    A:
    Inspect the fluid level in the brake master cylinder reservoir; if the level is above midway between the maximum-full and minimum allowable points, remove fluid to the midway point.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Pad
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Brake Pads 19329677 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19329677 Brake Pads is available in the market under the name GM Brake Pad. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19329677 Brake Pads fits certain Chevrolet Tahoe, Avalanche, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 19329677 maintains top performance when functioning as the Pad Kit, Brake; Disc Brake Hardware Kit unit at its Rear. The component 19329677 is constructed from durable material and its dimensions span 9.4 x 4.1 x 3.4 inches while weighing 3.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rear Pads. The part 19329677 has available replacement options 15792633, 23112025, 25949454, 15945636. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.