ChevyParts
My Garage
My Account
Cart
OEM 2009 Cadillac XLR Antenna Cable
Radio Antenna Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Antenna Cables found
2009 Cadillac XLR Antenna Cable
Part Number: 13581173$61.59 MSRP: $119.55You Save: $57.96 (49%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable Kit, Radio Antenna; Cable; Cable Kit, Vehicle Navigation/Information; Cable, Radio Antenna
- Item Weight: 0.30 Pounds
- Item Dimensions: 12.1 x 7.8 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13581173
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac XLR Antenna Cable, Driver Side
Part Number: 10380504$44.20 MSRP: $83.01You Save: $38.81 (47%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Cable, Radio Antenna; Cable
- Position: Driver Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 215.3 x 2.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10380504
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Radio Antenna; Cable
- Position: Passenger Side
- Item Weight: 0.40 Pounds
- Item Dimensions: 9.1 x 6.7 x 4.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10380505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Radio Antenna
- Position: Driver Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.2 x 3.4 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10318391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Cable, Radio Antenna
- Position: Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 5.1 x 3.3 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10318392
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac XLR Antenna Cable
With a comprehensive array of OEM 2009 Cadillac XLR Antenna Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac XLR Antenna Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Cadillac XLR Parts Questions & Experts Answers
- Q: How to Replace and Repair an Antenna Cable for a Digital Radio for Digital Radio on 2009 Cadillac XLR?A: The first step to replace the Digital Radio Antenna Cable requires access to antenna cable connectors by opening the trunk area cloth cover before cutting both ends off the antenna cable at the digital receiver location. First unfasten the right front IP closeout panel while removing the right front carpet retainer followed by soft release of the right side door manual release lever that you should place aside. Start by taking out the right side lock pillar trim and pinpoint where the harness passes through the plastic pillar door cutout before you can pull back this seal. You should first pull back the seal before disconnecting the digital antenna connector and finally cutting the body side connector from the system. After removing the left front carpet retainer and parking brake assembly move to the left side where you will cut off the body side connector from the harness. You should run a mechanic's wire behind the IP/center console and attach the left side cable end to the wire after pulling through to the left IP while keeping cable routing the same as original. Make a passage for the new connector through the plastic seal of the left side pillar to door pass-through before reconnecting it and applying tie straps for secure placement of the new antenna cable beneath the left side of the dash. Perform the mirror sequence on the right side while advancing the new connector through the plastic seal then reconnecting it before securing both ends. Direct the new antenna cable through the left side of the body while keeping it on the same track as the previous cable until it reaches the digital receiver. Reinstallation requires the parking brake assembly followed by the left front carpet retainer and right side lock pillar trim, right front carpet retainer, right side door manual release lever, and right side IP closeout panel.
Related 2009 Cadillac XLR Parts
2009 Cadillac XLR Antenna
2009 Cadillac XLR Body Control Module
2009 Cadillac XLR Coolant Temperature Sensor
2009 Cadillac XLR Engine Control Module
2009 Cadillac XLR Fuel Level Sensor
2009 Cadillac XLR Fuel Pump Relay
2009 Cadillac XLR Fuse Box
2009 Cadillac XLR Instrument Cluster
2009 Cadillac XLR Knock Sensor
2009 Cadillac XLR Seat Switch
2009 Cadillac XLR Suspension Control Module
2009 Cadillac XLR Wiper Motor