How to replace the Engine Coolant Temperature Sensor on 2009 Cadillac XLR?

You must begin by turning off the ignition then draining the coolant until it sits below the ect sensor level. Remove the supercharger assembly after which you should disconnect the ect sensor harness connector and extract the ect sensor from the right-hand Cylinder Head. The ect sensor installation requires a thread coating of sealer before you tighten it to 20 nm (15 lb ft). Reconnect the ect sensor harness connector before placing back the supercharger assembly. Finally, refill the coolant system. All replacement parts should be the correct model number for the installation and you need to apply the defined torque values to prevent damage.

OEM 2009 Cadillac XLR Coolant Temperature Sensor

Coolant Water Temperature Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Temperature Sensor found

View related parts
2009 Cadillac XLR Coolant Temperature Sensor
Part Number: 15326386
$27.19 MSRP: $51.06
You Save: $23.87 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Engine Coolant Temperature; Air Charge Temperature Sensor; Intake Air Temperature Sensor.; Temperature Sensor; Manifold Pressure Sensor; Oil Pressure Unit; Fan Switch; Other Sensors
- Replaces: 12146312, 25036979
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.0 x 1.2 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15326386
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac XLR Coolant Temperature Sensor

With a comprehensive array of OEM 2009 Cadillac XLR Coolant Temperature Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac XLR Coolant Temperature Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac XLR Parts Questions & Experts Answers

Q: How to replace the Engine Coolant Temperature Sensor on 2009 Cadillac XLR?
A: You must begin by turning off the ignition then draining the coolant until it sits below the ect sensor level. Remove the supercharger assembly after which you should disconnect the ect sensor harness connector and extract the ect sensor from the right-hand Cylinder Head. The ect sensor installation requires a thread coating of sealer before you tighten it to 20 nm (15 lb ft). Reconnect the ect sensor harness connector before placing back the supercharger assembly. Finally, refill the coolant system. All replacement parts should be the correct model number for the installation and you need to apply the defined torque values to prevent damage.

Related 2009 Cadillac XLR Parts

Alternate Year Models

2008 Cadillac XLR Coolant Temperature Sensor