How to Ensure Proper Installation of the Crankshaft Seal on 2009 Cadillac XLR?

In order to change the crankshaft rear oil seal, the flywheel should be removed and the Crankshaft Rear Oil Seal Remover inserted. Self-drilling screws are inserted on the seal and the centrally forcing screw tightened to remove the seal. Wipe the bore, evenly apply the sealant and apply the new seal. Lastly, install the flywheel again.

OEM 2009 Cadillac XLR Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Seal found

View related parts
2009 Cadillac XLR Rear Main Seal Part Number: 12568025
$53.23 MSRP: $90.63
You Save: $37.40 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Crankshaft Rear Main Bearing Cap; Crankshaft Seal; Seal, Engine Rear Main Bearing
- Position: Rear
- Replaces: 12556355, 12556107
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.2 x 5.3 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12568025
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac XLR Crankshaft Seal

With a comprehensive array of OEM 2009 Cadillac XLR Crankshaft Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac XLR Crankshaft Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac XLR Crankshaft Seal Parts and Q&A

Q: How to Ensure Proper Installation of the Crankshaft Seal on 2009 Cadillac XLR?
A: In order to change the crankshaft rear oil seal, the flywheel should be removed and the Crankshaft Rear Oil Seal Remover inserted. Self-drilling screws are inserted on the seal and the centrally forcing screw tightened to remove the seal. Wipe the bore, evenly apply the sealant and apply the new seal. Lastly, install the flywheel again.