How to replace the front brake disc on 2009 Chevrolet Express 3500?

Vehicle service begins with vehicle lift and support followed by tire and wheel removal to access the front Brake Disc component. One must insert a drift or large screwdriver into the brake caliper to lock the disc from rotation before marking the hub extension alignment while removing front hub extension bolts from dual wheel vehicles. You can use a rubber mallet to lightly tap the hub extension's surrounding area. Start by placing a c-clamp on top of the brake caliper to push pistons toward the caliper bores then take out the caliper by securing it with heavy mechanic wire to protect the brake hose. Apply penetrating oil to rusted disc surfaces before using two m10 x 1.5 bolts to push the disc off the hub when push nuts are not present. Use (J 42450-A) to clear all rust and contaminants from hub flanges while (J 41013) should be used inside Brake Disc dimensions. Clean both mating surfaces before installing the disc in its original position. Measure the lateral runout of the assembled Brake Disc after installation. Use the specified procedure to address any dimensional deviations that exceed recommended values. After cleaning bolt threads, apply threadlocker gm p/n 12345493 to caliper bracket mounting bolts then tighten them up to 175 nm (129 lb ft) for jh5 or 300 nm (221 lb ft) for jh6 and jh7. The front wheel hub extension for dual wheel vehicles requires installation at its original position which should be followed by tightening the nuts to 130 nm (96 lb ft). Follow these steps: reinstall the tire and wheel assembly, lower the vehicle and proceed without starting the engine then gently depress the brake pedal up to 2/3 of its length before gently releasing it. Provide a firm pedal response by repeating the procedure and achieve it through the master cylinder reservoir with clean brake fluid at proper levels.

OEM 2009 Chevrolet Express 3500 Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Discs found

View related parts
2009 Chevrolet Express 3500 Rotor
Part Number: 15712803
$141.83 MSRP: $250.60
You Save: $108.77 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Item Weight: 30.00 Pounds
- Item Dimensions: 16.5 x 17.0 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15712803
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 Chevrolet Express 3500 Rotor
Part Number: 15712801
$96.36 MSRP: $180.93
You Save: $84.57 (47%)
ADD TO CART
Product Specifications
- Other Name: Rotor, Front And Rear Wheel Brake; Brake Rotor
- Position: Rear
- Item Weight: 13.40 Pounds
- Item Dimensions: 15.9 x 16.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15712801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 Chevrolet Express 3500 Rotor, Front
Part Number: 15942198
$181.17 MSRP: $324.96
You Save: $143.79 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 18060654
- Item Weight: 30.20 Pounds
- Item Dimensions: 14.2 x 13.8 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15942198
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2009 Chevrolet Express 3500 Rotor, Rear
Part Number: 15127537
$145.40 MSRP: $260.76
You Save: $115.36 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Item Weight: 24.20 Pounds
- Item Dimensions: 16.5 x 16.2 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15127537
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
2009 Chevrolet Express 3500 Rotor, Front
Part Number: 22950036
$143.63 MSRP: $257.65
You Save: $114.02 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 88963556, 25819670
- Item Weight: 29.40 Pounds
- Item Dimensions: 13.9 x 14.2 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22950036
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 Chevrolet Express 3500 Rotor, Front
Part Number: 84587921
$156.52 MSRP: $280.76
You Save: $124.24 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Replaces: 15733625
- Item Weight: 31.60 Pounds
- Item Dimensions: 14.2 x 13.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 84587921
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Express 3500 Submodels:
- Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS

2009 Chevrolet Express 3500 Brake Disc

With a comprehensive array of OEM 2009 Chevrolet Express 3500 Brake Disc, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Express 3500 Brake Disc are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Express 3500 Brake Disc Parts Questions & Experts Answers

Q: How to replace the front brake disc on 2009 Chevrolet Express 3500?
A: Vehicle service begins with vehicle lift and support followed by tire and wheel removal to access the front Brake Disc component. One must insert a drift or large screwdriver into the brake caliper to lock the disc from rotation before marking the hub extension alignment while removing front hub extension bolts from dual wheel vehicles. You can use a rubber mallet to lightly tap the hub extension's surrounding area. Start by placing a c-clamp on top of the brake caliper to push pistons toward the caliper bores then take out the caliper by securing it with heavy mechanic wire to protect the brake hose. Apply penetrating oil to rusted disc surfaces before using two m10 x 1.5 bolts to push the disc off the hub when push nuts are not present. Use (J 42450-A) to clear all rust and contaminants from hub flanges while (J 41013) should be used inside Brake Disc dimensions. Clean both mating surfaces before installing the disc in its original position. Measure the lateral runout of the assembled Brake Disc after installation. Use the specified procedure to address any dimensional deviations that exceed recommended values. After cleaning bolt threads, apply threadlocker gm p/n 12345493 to caliper bracket mounting bolts then tighten them up to 175 nm (129 lb ft) for jh5 or 300 nm (221 lb ft) for jh6 and jh7. The front wheel hub extension for dual wheel vehicles requires installation at its original position which should be followed by tightening the nuts to 130 nm (96 lb ft). Follow these steps: reinstall the tire and wheel assembly, lower the vehicle and proceed without starting the engine then gently depress the brake pedal up to 2/3 of its length before gently releasing it. Provide a firm pedal response by repeating the procedure and achieve it through the master cylinder reservoir with clean brake fluid at proper levels.