How to replace the drive pinion bearings on 8.6 and 9.5 inch axles on 2009 GMC Savana 2500?

You need to begin drive Pinion Bearing replacement for 8.6 and 9.5 inch axles by lifting the vehicle before taking out the Differential assembly. Drive the removal of the drive Pinion Bearing from the 8.6 inch axle with the dt 47688 (Pinion Bearing Remover) through a press operation while the j 22912-b (Split Plate Bearing Installer) must be coupled with a press for 9.5 inch axle bearing replacement. You should start by removing the selective pinion shim before hitting the outer and inner Pinion Bearing cups of the axle housing with a hammer using a brass drift. The j 8611-01 (Rear Pinion Bearing Race Installer) serves for 8.6 inch axle installation but the 9.5 inch axle requires the j 8092 universal driver handle to fit the outer Pinion Bearing cup. Installation proceeds with the j 45780 Pinion Bearing cup installer for 8.6 inch axle and j 22306 pinion cup bearing installer-rear for 9.5 inch axle. Identify the appropriate shim size for the drive pinion before you install its shim followed by the j 22828 (Input/Counterbalance Race Installer) or j 36614 (Inner Pinion Bearing Installer) instrument to set the inner Pinion Bearing. Insert a new collapsible spacer before applying proper axle lubricant on the pinion bearings and mounting the outer Pinion Bearing within the axle housing. First install a new pinion oil seal with the j 22388 (Pinion Oil Seal Installer). Then position the pinion into its housing space with correct marking alignment. Finally apply a sealant to all pinion-yoke splines before yoke installation. A soft-faced hammer should be used to set the pinion yoke on the pinion shaft before you install a new pinion nut. The j 8614-01 (Flange and Pulley Holding Tool) must be utilized to tighten the pinion nut until the pinion end play is completely seated while rotating the pinion to properly install the bearings. Use an inch-pound torque wrench to measure the torque of bearing rotation with used bearings requiring 1.0-2.3 nm (10-20 lb in) and new bearings requiring 1.7-3.4 nm (15-30 lb in). Make adjustments to reach the required torque values. After reaching the defined torque value the technician must spin the pinion multiple times before reattaching the Differential assembly and completing the axle lubrication before lowering the vehicle.

OEM 2009 GMC Savana 2500 Pinion Bearing

Transmission Pinion Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Pinion Bearings found

View related parts
2009 GMC Savana 2500 Pinion Bearings, Inner Part Number: 25824251
$91.87 MSRP: $179.86
You Save: $87.99 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Side Bearings; Bearing, Drive Pinion Rear And Intermediate
- Position: Inner
- Item Weight: 2.30 Pounds
- Item Dimensions: 4.1 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25824251
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Wheel Bearing Part Number: 9436881
$80.31 MSRP: $145.36
You Save: $65.05 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Item Weight: 1.70 Pounds
- Item Dimensions: 5.1 x 1.5 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9436881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE, SLT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Side Bearings Part Number: 88943839
$48.83 MSRP: $144.56
You Save: $95.73 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Bearing
- Replaces: 26091723
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.7 x 4.7 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 88943839
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Side Bearings Part Number: 25824250
$73.65 MSRP: $142.94
You Save: $69.29 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing
- Replaces: 09418390, 9418390
- Item Weight: 1.20 Pounds
- Item Dimensions: 4.3 x 4.3 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25824250
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Pinion Bearings Part Number: 23243839
$72.64 MSRP: $142.22
You Save: $69.58 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Pinion; Differential Pinion Bearing; Rear Pinion Bearing; Front/Inner/Outer Pinion; Diff/Drive Axle; Pinion/Clutch/Rear Wheel
- Position: Front
- Replaces: 09418357, 26053758, 9418357, 15286375, 20997052, 22786621, 9418356, 09418356, 12479221
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.2 x 4.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23243839
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Pinion Bearings Part Number: 9413427
$56.84 MSRP: $109.76
You Save: $52.92 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear, Front, Outer Pinion Bearings; Differential Drive, Steering Knuckle King, Pinion Shaft, Front Axle Bearings.
- Item Weight: 1.20 Pounds
- Item Dimensions: 3.1 x 3.2 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9413427
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Side Bearings, Front Part Number: 26046759
$36.01 MSRP: $106.64
You Save: $70.63 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Differential; Bearing; Bearing, Differential Side Gear
- Position: Front
- Item Weight: 0.80 Pounds
- Item Dimensions: 3.0 x 3.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 26046759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Pinion Bearings Part Number: 9439879
$35.47 MSRP: $105.01
You Save: $69.54 (67%)
ADD TO CART
Product Specifications
- Other Name: Bearingfrt Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Axle Bearing; Output Shaft Bearing; Rear Pinion Bearing; Inner & Outer Pinion Bearings; Differential Drive Pinion Assembly.
- Position: Front Inner
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.2 x 3.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9439879
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Pinion Seal, Outer Part Number: 25824252
$50.05 MSRP: $97.14
You Save: $47.09 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Pinion Bearings; Side Bearings; Bearing; Bearing, Pinion Shaft Front
- Position: Outer
- Item Weight: 1.30 Pounds
- Item Dimensions: 4.2 x 4.2 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25824252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Pinion Bearings Part Number: 9417784
$24.86 MSRP: $68.16
You Save: $43.30 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pinion Gear Front; Differential Pinion Bearing; Axle Bearing; Rear Pinion Bearing; Front Pinion Bearing; Outer Pinion Bearing; Differential Drive Pinion Bearing; Front Axle Bearing.
- Position: Outer
- Item Weight: 1.10 Pounds
- Item Dimensions: 3.0 x 3.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9417784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Pinion Bearings Part Number: 9413168
$93.86 MSRP: $167.61
You Save: $73.75 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Roller; Differential Pinion Bearing; Rear Pinion Bearing; Front Pinion Bearing; Drive Pinion Bearing Assembly.
- Item Weight: 2.30 Pounds
- Item Dimensions: 5.2 x 4.2 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9413168
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Pinion Bearings, Outer Part Number: 15534483
$53.12 MSRP: $94.85
You Save: $41.73 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Front Pinion Bearing; Bearing, Differential Pinion; Bearing, Pinion Shaft Front
- Position: Outer
- Replaces: 09440836, 9440836
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.0 x 3.6 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15534483
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT, SLE | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
2009 GMC Savana 2500 Side Bearings Part Number: 9432585
$72.64 MSRP: $215.00
You Save: $142.36 (67%)
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Differential; Differential Bearing; Bearing, Differential Side Gear; Bearing, Differential Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 4.5 x 4.6 x 1.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9432585
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 2500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2009 GMC Savana 2500 Pinion Bearing

With a comprehensive array of OEM 2009 GMC Savana 2500 Pinion Bearing, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Savana 2500 Pinion Bearing are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Savana 2500 Pinion Bearing Parts and Q&A

Q: How to replace the drive pinion bearings on 8.6 and 9.5 inch axles on 2009 GMC Savana 2500?
A: You need to begin drive Pinion Bearing replacement for 8.6 and 9.5 inch axles by lifting the vehicle before taking out the Differential assembly. Drive the removal of the drive Pinion Bearing from the 8.6 inch axle with the dt 47688 (Pinion Bearing Remover) through a press operation while the j 22912-b (Split Plate Bearing Installer) must be coupled with a press for 9.5 inch axle bearing replacement. You should start by removing the selective pinion shim before hitting the outer and inner Pinion Bearing cups of the axle housing with a hammer using a brass drift. The j 8611-01 (Rear Pinion Bearing Race Installer) serves for 8.6 inch axle installation but the 9.5 inch axle requires the j 8092 universal driver handle to fit the outer Pinion Bearing cup. Installation proceeds with the j 45780 Pinion Bearing cup installer for 8.6 inch axle and j 22306 pinion cup bearing installer-rear for 9.5 inch axle. Identify the appropriate shim size for the drive pinion before you install its shim followed by the j 22828 (Input/Counterbalance Race Installer) or j 36614 (Inner Pinion Bearing Installer) instrument to set the inner Pinion Bearing. Insert a new collapsible spacer before applying proper axle lubricant on the pinion bearings and mounting the outer Pinion Bearing within the axle housing. First install a new pinion oil seal with the j 22388 (Pinion Oil Seal Installer). Then position the pinion into its housing space with correct marking alignment. Finally apply a sealant to all pinion-yoke splines before yoke installation. A soft-faced hammer should be used to set the pinion yoke on the pinion shaft before you install a new pinion nut. The j 8614-01 (Flange and Pulley Holding Tool) must be utilized to tighten the pinion nut until the pinion end play is completely seated while rotating the pinion to properly install the bearings. Use an inch-pound torque wrench to measure the torque of bearing rotation with used bearings requiring 1.0-2.3 nm (10-20 lb in) and new bearings requiring 1.7-3.4 nm (15-30 lb in). Make adjustments to reach the required torque values. After reaching the defined torque value the technician must spin the pinion multiple times before reattaching the Differential assembly and completing the axle lubrication before lowering the vehicle.