How to replace the rear brake calipers (J56) on 2010 Cadillac CTS?

To replace the rear brake caliper (J56), check the brake fluid level in the brake master cylinder reservoir first; if it is half way between maximum-full point and minimum allowable level then no fluid is needed to remove but if it is high reduce it to the half way point. Have all brake pads removed, thereafter braking hose fitting bolt removed, and then brake caliper inlet port capped to avoid fluid loss and contamination avoiding using any brake hose fitting gaskets again. Subsequently, take in the lower Brake Caliper Bolt and the upper Brake Caliper Bolt in order to remove the brake caliper. For installation, clean the brake caliper bolts and the threaded holes with denatured alcohol, and apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) for 2/3 of the length of the brake caliper bolts' threaded, and let it cure for approximately 10 minutes. Hand install the bolt of the lower brake caliper and the bolt of the upper brake caliper by tightening them in to a measurement of 130 nm (96 lb ft). Assemble the brake hose fitting bolt with 2 new brake hose fitting gaskets to the brake hose , and fit the brake hose assembly to the brake caliper and tighten the fitting bolt to 49 nm (36 lb ft). Lastly, install the brake paddings and bleed the hydraulic break system.

OEM 2010 Cadillac CTS Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Brake Calipers found

View related parts
2010 Cadillac CTS Caliper, Rear Part Number: 25843042
$57.17 MSRP: $171.09
You Save: $113.92 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Item Weight: 5.40 Pounds
- Item Dimensions: 8.4 x 6.1 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25843042
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2010 Cadillac CTS Caliper, Rear Part Number: 25843041
$88.24 MSRP: $171.09
You Save: $82.85 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.2 x 6.3 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25843041
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2010 Cadillac CTS Caliper, Silver, Passenger Side Part Number: 25911233
$451.96 MSRP: $884.88
You Save: $432.92 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.1 x 5.2 x 12.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25911233
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- V, Vsport, Vsport Premium | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Caliper, Silver, Driver Side Part Number: 25911138
$331.20 MSRP: $621.97
You Save: $290.77 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 7.1 x 13.1 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25911138
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- V, Vsport, Vsport Premium | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Caliper Part Number: 15851351
$114.74 MSRP: $224.63
You Save: $109.89 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
- Item Weight: 6.20 Pounds
- Item Dimensions: 8.2 x 8.1 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15851351
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Caliper Part Number: 15853359
$74.76 MSRP: $224.63
You Save: $149.87 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
- Item Weight: 8.20 Pounds
- Item Dimensions: 8.1 x 5.2 x 11.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15853359
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Caliper Part Number: 15851479
$110.63 MSRP: $206.17
You Save: $95.54 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
- Item Weight: 12.10 Pounds
- Item Dimensions: 11.2 x 6.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15851479
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Caliper, Rear Passenger Side Part Number: 25843040
$86.53 MSRP: $160.89
You Save: $74.36 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Passenger Side
- Item Weight: 2.30 Pounds
- Item Dimensions: 8.2 x 6.2 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25843040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2010 Cadillac CTS Caliper, Rear Driver Side Part Number: 25843039
$88.14 MSRP: $160.89
You Save: $72.75 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly-Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Item Weight: 1.30 Pounds
- Item Dimensions: 9.4 x 11.2 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25843039
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2010 Cadillac CTS Caliper, Silver, Front Driver Side Part Number: 25912477
$511.19 MSRP: $992.14
You Save: $480.95 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly, Front Brake *Silver; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.5 x 9.3 x 19.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25912477
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- V, Vsport, Vsport Premium | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Caliper, Silver, Front Passenger Side Part Number: 25912967
$519.46 MSRP: $1017.07
You Save: $497.61 (49%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly, Front Brake *Silver; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Item Weight: 9.80 Pounds
- Item Dimensions: 8.3 x 7.4 x 14.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25912967
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- V, Vsport, Vsport Premium | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Cadillac CTS Caliper Part Number: 15851480
$109.41 MSRP: $195.36
You Save: $85.95 (44%)
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front
- Item Weight: 11.80 Pounds
- Item Dimensions: 11.0 x 6.4 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15851480
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac CTS Submodels:
- Base, Luxury, Performance, Premium, V, Vsport, Vsport Premium | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS

2010 Cadillac CTS Brake Calipers

With a comprehensive array of OEM 2010 Cadillac CTS Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac CTS Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac CTS Brake Calipers Parts and Q&A

Q: How to replace the rear brake calipers (J56) on 2010 Cadillac CTS?
A: To replace the rear brake caliper (J56), check the brake fluid level in the brake master cylinder reservoir first; if it is half way between maximum-full point and minimum allowable level then no fluid is needed to remove but if it is high reduce it to the half way point. Have all brake pads removed, thereafter braking hose fitting bolt removed, and then brake caliper inlet port capped to avoid fluid loss and contamination avoiding using any brake hose fitting gaskets again. Subsequently, take in the lower Brake Caliper Bolt and the upper Brake Caliper Bolt in order to remove the brake caliper. For installation, clean the brake caliper bolts and the threaded holes with denatured alcohol, and apply threadlocker gm p/n 12345493 (Canadian P/N 10953488) for 2/3 of the length of the brake caliper bolts' threaded, and let it cure for approximately 10 minutes. Hand install the bolt of the lower brake caliper and the bolt of the upper brake caliper by tightening them in to a measurement of 130 nm (96 lb ft). Assemble the brake hose fitting bolt with 2 new brake hose fitting gaskets to the brake hose , and fit the brake hose assembly to the brake caliper and tighten the fitting bolt to 49 nm (36 lb ft). Lastly, install the brake paddings and bleed the hydraulic break system.