Other Name: Arm, Steering Knuckle Upper & Lower Control; Control Arm
Position: Front Lower
Replaces: 15858207
Item Weight: 15.70 Pounds
Item Dimensions: 18.6 x 17.4 x 5.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 15931294
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2010 Cadillac DTS Submodels:
Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
2010 Cadillac DTS Control Arm
With a comprehensive array of OEM 2010 Cadillac DTS Control Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac DTS Control Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 Cadillac DTS Parts Questions & Experts Answers
Q: How to replace the Rear Axle Lower Control Arm (FE7) on 2010 Cadillac DTS?
A: The first step in FE7 Rear Axle Lower Control Arm replacement starts with removing the rear suspension support assembly. Begin by removing the stabilizer link bolt. In some cases you must also handle the hub and bearing. First remove all support bracket bolts and control arm nuts and bolts that secure the control arm to the rear suspension support assembly to extract the control arm. When installing the control arm nuts make sure to tighten them on a vehicle which rests unsupported on its wheels at normal operating height. Begin installation by screwing in the control arm to the rear suspension support assembly and adding the hub and bearing as needed. Use a new stabilizer link bolt together with its nut then torque them to 15 Nm (11 lbs ft). Position the reversed rear suspension support assembly along with the support bracket bolts in their proper place. Perform a trim height check after vehicle lowering while you tighten the control arm nuts to 149 Nm (110 lb ft).