How to replace the rear axle lower control arm (W/FE1, FE3) on Cadillac DTS?

The rear axle lower Control Arm replacement process starts with removal of rear suspension support assembly for w/fe1 and fe3 models. Begin by removing the stabilizer shaft link bolt and stabilizer shaft insulators and spacer. You should uninstall the hub and bearing when required. You need to unscrew both nuts and bolts attaching the Control Arm to the rear suspension support assembly to remove the lower Control Arm. Install the Control Arm nuts by maintaining vehicle suspension at normal height when the vehicle rests on its wheels with no support. Slide the lower Control Arm onto the rear suspension support assembly and install the Wheel Bearing if required. Special care must be exercised with all fasteners during installation. You must perform the assembly by attaching the stabilizer shaft link bolt alongside the spacer then insulator and finally tightening the stabilizer shaft link bolt to 15 nm (11 lb ft). Secure the rear suspension support assembly onto the vehicle while checking that Control Arm nuts and bolts maintain a torque of 106 nm (78 lb ft) when the vehicle rests at normal ride height. Finally, lower the vehicle.

OEM Cadillac DTS Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Control Arms found

View related parts
Cadillac DTS Control Arm, Rear
Part Number: 25710739
$291.07 MSRP: $1201.24
You Save: $910.17 (76%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Arm, Rear Axle Control Arm
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Control Arm, Rear Passenger Side
Part Number: 25820033
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Lower Control Arm; Arm, Rear Axle Control Arm
- Position: Rear Passenger Side
- Replaces: 15897790, 25771881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Control Arm, Rear Passenger Side
Part Number: 25820032
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Lateral Link; Lateral Arm; Arm, Rear Axle Control Arm
- Position: Rear Passenger Side
- Replaces: 25699090, 25628898, 25765591, 15897789, 25675173, 25690656
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Control Arm, Rear Driver Side
Part Number: 25820031
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Lower Control Arm; Arm, Rear Axle Control Arm
- Position: Rear Driver Side
- Replaces: 15897788, 25626733, 25743300, 25675172, 25690655, 25765590, 25699091, 25628897
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Lower Control Arm, Passenger Side
Part Number: 15939600
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Arm, Steering Knuckle Lower Control
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Lower Control Arm, Driver Side
Part Number: 15939599
$202.63 MSRP: $318.83
You Save: $116.20 (37%)
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Arm, Steering Knuckle Lower Control
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Control Arm, Rear
Part Number: 25710738
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Arm, Rear Axle Control Arm
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Lower Control Arm
Part Number: 15931295
Product Specifications
- Other Name: Arm, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Lower Control Arm
Part Number: 15931294
$160.09 MSRP: $251.90
You Save: $91.81 (37%)
Product Specifications
- Other Name: Arm, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Front Lower
- Replaces: 15858207
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

Cadillac DTS Control Arm

Our website offers an extensive catalog of genuine Cadillac DTS Control Arm at unbeatable prices. Every OEM Cadillac DTS Control Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac DTS Control Arm Parts Questions & Experts Answers

Lower Control Arm, Driver Side
15939599
Q: How to replace the rear axle lower control arm (W/FE1, FE3) on Cadillac DTS?
A: The rear axle lower Control Arm replacement process starts with removal of rear suspension support assembly for w/fe1 and fe3 models. Begin by removing the stabilizer shaft link bolt and stabilizer shaft insulators and spacer. You should uninstall the hub and bearing when required. You need to unscrew both nuts and bolts attaching the Control Arm to the rear suspension support assembly to remove the lower Control Arm. Install the Control Arm nuts by maintaining vehicle suspension at normal height when the vehicle rests on its wheels with no support. Slide the lower Control Arm onto the rear suspension support assembly and install the Wheel Bearing if required. Special care must be exercised with all fasteners during installation. You must perform the assembly by attaching the stabilizer shaft link bolt alongside the spacer then insulator and finally tightening the stabilizer shaft link bolt to 15 nm (11 lb ft). Secure the rear suspension support assembly onto the vehicle while checking that Control Arm nuts and bolts maintain a torque of 106 nm (78 lb ft) when the vehicle rests at normal ride height. Finally, lower the vehicle.

Related Cadillac DTS Parts

Browse Cadillac DTS Control Arm by Years

2011 2010 2009 2008 2007 2006