How to Service and Repair the Wheel Bearing and Wheel Hub on Cadillac DTS?

Start by lifting and supporting the vehicle. Then take off its tire and wheel followed by the brake rotor. Remove the wheel bearing/hub bolts by disconnecting the abs sensor wire connector first. Then you can pull out both the wheel bearing assembly and brake shield. You should sanitize the lower Control Arm surface and hole before adding the fresh wheel bearing and hub. Put the wheel bearing and hub assembly back onto the lower Control Arm using the brake shield after installing them both according to the fastener notice. Fasten the wheel bearing assembly with its retaining bolts then tighten them to 68 n.m force (50 lb ft). Install the brake rotor before reconnecting the abs sensor wire and reattaching the tire and wheel back to the vehicle.

OEM Cadillac DTS Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Wheel Bearings found

View related parts
Cadillac DTS Hub Assembly, Front
Part Number: 84641365
$217.28 MSRP: $425.44
You Save: $208.16 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Front Wheel (W/Wheel Speed Sensor); Front Hub & Bearing; Front Wheel Hub Kit; Rear Wheel Hub
- Position: Front
- Replaced by: 19433930
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Hub & Bearing, Rear
Part Number: 21998965
Product Specifications
- Other Name: Hub, Rear Wheel; Wheel Bearing and Hub Assembly; Wheel Bearing & Hub Assembly; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Hub & Bearing Assembly, Rear
Part Number: 25716676
$407.89 MSRP: $731.64
You Save: $323.75 (45%)
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Wheel Bearing; Axle Bearing; Hub, Rear Wheel
- Position: Rear
- Replaces: 25683107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
Cadillac DTS Hub & Bearing, Front
Part Number: 25678854
$591.43 MSRP: $1065.64
You Save: $474.21 (45%)
Product Specifications
- Other Name: Hub Assembly-Front Wheel (W/Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub, Front Wheel
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Cadillac DTS | Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

Cadillac DTS Wheel Bearing

Our website offers an extensive catalog of genuine Cadillac DTS Wheel Bearing at unbeatable prices. Every OEM Cadillac DTS Wheel Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac DTS Wheel Bearing Parts Questions & Experts Answers

Hub & Bearing Assembly, Rear
25716676
Q: How to Service and Repair the Wheel Bearing and Wheel Hub on Cadillac DTS?
A: Start by lifting and supporting the vehicle. Then take off its tire and wheel followed by the brake rotor. Remove the wheel bearing/hub bolts by disconnecting the abs sensor wire connector first. Then you can pull out both the wheel bearing assembly and brake shield. You should sanitize the lower Control Arm surface and hole before adding the fresh wheel bearing and hub. Put the wheel bearing and hub assembly back onto the lower Control Arm using the brake shield after installing them both according to the fastener notice. Fasten the wheel bearing assembly with its retaining bolts then tighten them to 68 n.m force (50 lb ft). Install the brake rotor before reconnecting the abs sensor wire and reattaching the tire and wheel back to the vehicle.