How to replace the Rear Axle Lower Control Arm (FE7) on 2008 Cadillac DTS?

The first step to replace the Front Bypass Rod (FE7) requires the removal of the rear suspension support assembly. Start by removing the stabilizer link bolt together with potential hub and bearing components. Before removing the control arm uninstall the bolts from both the support bracket while also disassembling the system that connects the control arm to the rear suspension support assembly. The control arm nuts should be tightened using a vehicle setup with unsupported stance on normal wheels at normal trim height. The installation sequence begins with control arm placement into the rear suspension support assembly and may require hub and bearing installation later. The installation requires new stabilizer link hardware and torque application at 15 N.m (11 lb ft). Install the rear suspension support assembly then fasten its support bracket bolts. Lower the vehicle to reach its required trim height then use torque wrenches to tighten control arm nuts to 149 N.m (110 lb ft) before finishing the vehicle's lowering process.

OEM 2008 Cadillac DTS Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Control Arms found

View related parts
2008 Cadillac DTS Control Arm, Rear
Part Number: 25710739
$291.07 MSRP: $1201.24
You Save: $910.17 (76%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Arm, Rear Axle Control Arm
- Position: Rear
- Item Weight: 52.70 Pounds
- Item Dimensions: 28.6 x 21.1 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710739
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac DTS Control Arm, Rear Passenger Side
Part Number: 25820032
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Lateral Link; Lateral Arm; Arm, Rear Axle Control Arm
- Position: Rear Passenger Side
- Replaces: 25699090, 25628898, 25765591, 15897789, 25675173, 25690656
- Item Weight: 15.80 Pounds
- Item Dimensions: 30.3 x 21.0 x 8.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25820032
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac DTS Control Arm, Rear Driver Side
Part Number: 25820031
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Lower Control Arm; Arm, Rear Axle Control Arm
- Position: Rear Driver Side
- Replaces: 15897788, 25626733, 25743300, 25675172, 25690655, 25765590, 25699091, 25628897
- Item Weight: 16.80 Pounds
- Item Dimensions: 31.2 x 22.1 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25820031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac DTS Lower Control Arm, Passenger Side
Part Number: 15939600
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Arm, Steering Knuckle Lower Control
- Position: Passenger Side
- Item Weight: 10.60 Pounds
- Item Dimensions: 19.0 x 17.5 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15939600
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac DTS Control Arm, Rear Passenger Side
Part Number: 25820033
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Lower Control Arm; Arm, Rear Axle Control Arm
- Position: Rear Passenger Side
- Replaces: 15897790, 25771881
- Item Weight: 17.30 Pounds
- Item Dimensions: 28.4 x 21.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25820033
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac DTS Lower Control Arm, Driver Side
Part Number: 15939599
$202.63 MSRP: $318.83
You Save: $116.20 (37%)
Product Specifications
- Other Name: Arm, Steering Knuckle Control Arm and Ball Joint Assembly; Suspension Control Arm Assembly.; Arm, Steering Knuckle Lower Control
- Position: Driver Side
- Item Weight: 11.00 Pounds
- Item Dimensions: 3.1 x 18.6 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15939599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac DTS Control Arm, Rear
Part Number: 25710738
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Control; Arm, Rear Axle Control Arm
- Position: Rear
- Item Weight: 4.00 Pounds
- Item Dimensions: 28.1 x 26.0 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25710738
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac DTS Lower Control Arm
Part Number: 15931295
Product Specifications
- Other Name: Arm, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Front Lower
- Item Weight: 14.70 Pounds
- Item Dimensions: 18.4 x 17.9 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15931295
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS
View related parts
2008 Cadillac DTS Lower Control Arm
Part Number: 15931294
$160.09 MSRP: $251.90
You Save: $91.81 (37%)
Product Specifications
- Other Name: Arm, Steering Knuckle Upper & Lower Control; Control Arm
- Position: Front Lower
- Replaces: 15858207
- Item Weight: 15.70 Pounds
- Item Dimensions: 18.6 x 17.4 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15931294
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac DTS Submodels:
- Base, Livery, Luxury, Platinum, Premium | 8 Cyl 4.6 L GAS

2008 Cadillac DTS Control Arm

With a comprehensive array of OEM 2008 Cadillac DTS Control Arm, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac DTS Control Arm are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac DTS Parts Questions & Experts Answers

Q: How to replace the Rear Axle Lower Control Arm (FE7) on 2008 Cadillac DTS?
A: The first step to replace the Front Bypass Rod (FE7) requires the removal of the rear suspension support assembly. Start by removing the stabilizer link bolt together with potential hub and bearing components. Before removing the control arm uninstall the bolts from both the support bracket while also disassembling the system that connects the control arm to the rear suspension support assembly. The control arm nuts should be tightened using a vehicle setup with unsupported stance on normal wheels at normal trim height. The installation sequence begins with control arm placement into the rear suspension support assembly and may require hub and bearing installation later. The installation requires new stabilizer link hardware and torque application at 15 N.m (11 lb ft). Install the rear suspension support assembly then fasten its support bracket bolts. Lower the vehicle to reach its required trim height then use torque wrenches to tighten control arm nuts to 149 N.m (110 lb ft) before finishing the vehicle's lowering process.

Related 2008 Cadillac DTS Parts

Alternate Year Models

2007 Cadillac DTS Control Arm 2009 Cadillac DTS Control Arm