How to replace the blower control switches on 2010 Chevrolet Aveo?

Start by disconnecting the negative battery terminal when replacing the blower motor switch. Disassemble the hvac control unit first. After getting the switch assembly free you need to remove screws from the knob mount support then take out the switch assembly from its place. Keep track of the spring position along with the electrical contact washer and knob post's contact key/keyway. Fit the spring and electrical contact washer onto the blower switch knob post then align the key to its matching groove before putting the switch over the mount posts. Secure the switch with screws then attach electrical connectors to the back of the control unit. Return the hvac control assembly and connect the negative battery wire last. Complete an operational test of all the blower switch positions.

OEM 2010 Chevrolet Aveo Blower Control Switches

HVAC Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Blower Control Switches found

View related parts
2010 Chevrolet Aveo Heater Control, Beige
Part Number: 96437339
$35.04 MSRP: $84.74
You Save: $49.70 (59%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Air Conditioner Electric Temperature And Motor Control; Climate Control Module; Blower Control Switch; Dash Control Unit
- Item Weight: 1.30 Pounds
- Item Dimensions: 8.2 x 6.2 x 13.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96437339
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Heater Control, Black
Part Number: 96650500
Product Specifications
- Other Name: Switch Assembly, Heater & A/C Programmer Blower *Black; Climate Control Module; Blower Control Switch; Switch, A/C Electric Temperature And Motor Control
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.3 x 6.2 x 13.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96650500
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Heater Control, Beige; Black
Part Number: 96437334
Product Specifications
- Other Name: Switch, Air Conditioner Electric Temperature And Motor Control; Climate Control Module; Blower Control Switch; Dash Control Unit; Switch, A/C Electric Temperature And Motor Control
- Item Weight: 5.30 Pounds
- Item Dimensions: 8.2 x 20.0 x 10.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96437334
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Fan Switch
Part Number: 96475871
Product Specifications
- Other Name: Switch Assembly, Heater Control Blower; Climate Control Module; Blower Control Switch; Blower Motor Switch; Switch, Heater Control
- Item Weight: 1.80 Pounds
- Item Dimensions: 4.2 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96475871
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Blower Control Switches

With a comprehensive array of OEM 2010 Chevrolet Aveo Blower Control Switches, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Blower Control Switches are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Blower Control Switches Parts Questions & Experts Answers

Q: How to replace the blower control switches on 2010 Chevrolet Aveo?
A: Start by disconnecting the negative battery terminal when replacing the blower motor switch. Disassemble the hvac control unit first. After getting the switch assembly free you need to remove screws from the knob mount support then take out the switch assembly from its place. Keep track of the spring position along with the electrical contact washer and knob post's contact key/keyway. Fit the spring and electrical contact washer onto the blower switch knob post then align the key to its matching groove before putting the switch over the mount posts. Secure the switch with screws then attach electrical connectors to the back of the control unit. Return the hvac control assembly and connect the negative battery wire last. Complete an operational test of all the blower switch positions.