OEM 2010 Chevrolet Aveo A/C Condenser

2010 Chevrolet Aveo Parts Questions & Experts Answers

• Q: How to replace the A/C Condenser (except in North America) on 2010 Chevrolet Aveo?

  A: The air conditioning condenser replacement process (except North America) requires the negative Battery Cable disconnection followed by proper refrigerant discharge and recovery procedures. After disconnecting the refrigerant discharge hose connector block bolt from the condenser you should remove the liquid pipe connector block to condenser retaining bolt. You need to eliminate the Radiator then seal all accessible spaces for anti-contamination purposes. Begin by unfastening the condenser mount bolts and carefully remove the condenser from the Radiator position. Before fitting the condenser on the Radiator ensure to install new o-rings on receiver-dryer tube fittings and have condenser rubber mounts in position while checking that lower mount shock protectors fit their designated holes. Tighten the upper condenser bolts to 8 nm (70 lb in) during installation of the condenser mount bolts. After installed radiators you should torque the connector block bolt on the condenser at 12 lb ft (16 Nm) and afterward torque the liquid pipe connector block bolt to condenser retaining bolt at 10 lb ft (14 Nm). Reconnecting the negative Battery Cable should be followed by evacuating and recharging the a/c system.