OEM 2010 Chevrolet Corvette Dipstick Tube

2010 Chevrolet Corvette Parts Questions & Experts Answers

• Q: How to replace the Dipstick Tube on 2010 Chevrolet Corvette?

  A: The procedure to replace the oil level indicator tube begins by removing the oil level indicator and oil level indicator tube bolt followed by removing the tube itself. Look for damage in the O-ring seal before deciding to keep it if it remains intact. You should remove the O-ring which is currently installed onto the oil level indicator tube. Clean engine oil serves to lubricate the O-ring seal before proper installation of the oil level indicator tube. Lift the vehicle properly before inserting the oil level indicator tube into the engine block until its aluminum collar reaches engine block mounting position for final installation. Secure the oil level indicator tube bolt by tightening it to 25 Nm (18 lb ft). To complete the installation you need to put in place the oil level indicator then verify the oil measurement and supplement oil if necessary.