How to replace the power vacuum brake booster on 2010 Chevrolet Equinox?

Removing the vacuum sensor and hose, the master cylinder, BPMV, and its bracket are required to remove the Power Vacuum Brake Booster. Unassemble the position sensor of the brake pedal and the pushrod. Take out the booster, check the gasket, and fit the new booster making sure that all the parts are correctly connected and attached.

OEM 2010 Chevrolet Equinox Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2010 Chevrolet Equinox Brake Booster Part Number: 22807708
$156.64 MSRP: $303.97
You Save: $147.33 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Power Booster
- Replaces: 20849578, 20985652, 20990926
- Item Weight: 12.50 Pounds
- Item Dimensions: 16.8 x 11.1 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22807708
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Equinox Submodels:
- L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

2010 Chevrolet Equinox Brake Booster

With a comprehensive array of OEM 2010 Chevrolet Equinox Brake Booster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Equinox Brake Booster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Equinox Brake Booster Parts and Q&A

Q: How to replace the power vacuum brake booster on 2010 Chevrolet Equinox?
A: Removing the vacuum sensor and hose, the master cylinder, BPMV, and its bracket are required to remove the Power Vacuum Brake Booster. Unassemble the position sensor of the brake pedal and the pushrod. Take out the booster, check the gasket, and fit the new booster making sure that all the parts are correctly connected and attached.