How to replace the battery sensor on 2010 Chevrolet HHR?

Start the replacement process by disconnecting the negative Battery Cable. Peel off the tape from the battery current sensor's connection to the negative Battery Cable before taking the sensor away from the cable. Route the negative Battery Cable ground end through the battery current sensor at its original position for installation. Finally fix the battery current sensor to the negative Battery Cable using tape and complete the process by joining the cable to the battery.

OEM 2010 Chevrolet HHR Battery Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Battery Sensor found

View related parts
2010 Chevrolet HHR Battery Current Sensor, Green Line
Part Number: 13505369
$19.14 MSRP: $35.94
You Save: $16.80 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Battery; Voltage Sensor; Negative Cable Cover; Sensor
- Replaces: 13502261
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.8 x 2.8 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13505369
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2010 Chevrolet HHR Battery Sensor

With a comprehensive array of OEM 2010 Chevrolet HHR Battery Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet HHR Battery Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the battery sensor on 2010 Chevrolet HHR?
A: Start the replacement process by disconnecting the negative Battery Cable. Peel off the tape from the battery current sensor's connection to the negative Battery Cable before taking the sensor away from the cable. Route the negative Battery Cable ground end through the battery current sensor at its original position for installation. Finally fix the battery current sensor to the negative Battery Cable using tape and complete the process by joining the cable to the battery.