How to replace the lower control arm ball joint on 2010 Chevrolet Impala?

To start working on the lower Control Arm Ball Joint you need to lift and stabilize the vehicle. First lift the vehicle then unload wheels and tires to access and take down the lower Control Arm. Place the lower Control Arm into a strong holding tool. Use the correct size drill to remove the rivets from the Control Arm bottom. Use a standard hammer and an appropriate drift punch to knock out all remaining rivets from the Control Arm until the Ball Joint can come out. Install the new joint into the lower Control Arm with new bolts facing downwards toward the wheel axle. Mount the new Ball Joint retaining nuts onto their sockets then fasten them to 68 nm (50 lb ft). Replace the lower Control Arm before putting back the wheels and tires. Lower the vehicle after taking away all support components.

OEM 2010 Chevrolet Impala Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ball Joint found

View related parts
2010 Chevrolet Impala Ball Joint Part Number: 88965333
$51.99 MSRP: $82.54
You Save: $30.55 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Lower Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm
- Position: Front Lower
- Replaces: 88955451, 22157089
- Item Weight: 1.80 Pounds
- Item Dimensions: 7.1 x 4.3 x 4.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88965333
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Impala Submodels:
- 50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

2010 Chevrolet Impala Ball Joint

With a comprehensive array of OEM 2010 Chevrolet Impala Ball Joint, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Impala Ball Joint are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Impala Ball Joint Parts and Q&A

Q: How to replace the lower control arm ball joint on 2010 Chevrolet Impala?
A: To start working on the lower Control Arm Ball Joint you need to lift and stabilize the vehicle. First lift the vehicle then unload wheels and tires to access and take down the lower Control Arm. Place the lower Control Arm into a strong holding tool. Use the correct size drill to remove the rivets from the Control Arm bottom. Use a standard hammer and an appropriate drift punch to knock out all remaining rivets from the Control Arm until the Ball Joint can come out. Install the new joint into the lower Control Arm with new bolts facing downwards toward the wheel axle. Mount the new Ball Joint retaining nuts onto their sockets then fasten them to 68 nm (50 lb ft). Replace the lower Control Arm before putting back the wheels and tires. Lower the vehicle after taking away all support components.