How to replace the canister purge valves on Buick LaCrosse?

A vehicle owner must switch the ignition off before starting the replacement of the evaporative emission canister purge solenoid valve. Start by detaching the purge line from the purge valve solenoid and then separate the electrical connector of that solenoid. The next step requires removal of the solenoid and bolt from the Intake Manifold after purging the line from its manifold connection. Install the purge valve solenoid to the Intake Manifold then tighten the purge solenoid bolt to 10 n.m (89 lb in). Begin the installation by attaching the purge line to the purge valve solenoid's manifold side followed by reconnecting electrical connectivity and finishing with the purge line connection to the purge valve solenoid.

How to replace the canister purge valves on Buick LeSabre?

The first step to install a new EVAPORATIVE EMISSION (EVAP) CANISTER PURGE SOLENOID VALVE is to take off the fuel injector sight shield. Begin replacement of the EVAPORATIVE EMISSION (EVAP) CANISTER PURGE SOLENOID VALVE by disconnecting its harness connector and removing the vacuum hoses and purge pipe from the valve. Pull the tab located on the EVAP canister purge valve bracket to extract the valve. Mount the EVAP canister purge valve to the canister bracket after which connect purge pipe and vacuum hose to the valve. Finally, put the fuel injector sight shield back in before reconnecting the EVAP canister purge valve harness connector.

How to replace the canister purge valves on Buick Regal?

The starting point to replace the EVAP canister purge valves requires turning OFF the ignition and removing the fuel injector sight shield. First detach the evaporative emission canister purge valve harness connector followed by purge pipe removal and disconnecting the vacuum supply hose. Remove the EVAP canister purge valves upon releasing the retention bracket on its mounting bracket then check for carbon leaks from the valves. Cable harness installation should proceed by first mounting the new EVAP canister purge valves onto their bracket followed by reconnection of purge pipe and vacuum supply hoses and cable harness connector before reattaching the fuel injector sight shield.

OEM Buick Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

35 Canister Purge Valves found

View related parts
Buick Solenoid Valve
Part Number: 20952523
$40.29 MSRP: $81.84
You Save: $41.55 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Vent Solenoid; Vent Control Solenoid; Solenoid, Fuel Tank Evaporator/Purge Control
- Replaces: 15839554, 25932568
Fits the following Buick Models:
- LaCrosse | 2007-2009 | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Solenoid Valve
Part Number: 13575703
$28.55 MSRP: $53.62
You Save: $25.07 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Solenoid Assembly-Evaporator Emission Canister; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Control Valve; Shut-Off Valve; Fuel Tank Vent; Vapor Valve; Vent Control Solenoid; Fuel Tank Evaporator/Purge Control
- Replaces: 10293954, 10337458, 20761332
Fits the following Buick Models:
- Century | 1998-2003 | Custom, Limited | 6 Cyl 3.1 L GAS
- Regal | 1998-2003 | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick PCV Valve
Part Number: 12608378
$32.83 MSRP: $58.62
You Save: $25.79 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid; Purge Valve; Purge Solenoid; Purge Control Valve
- Replaced by: 12735400
Fits the following Buick Models:
- LaCrosse | 2006-2009 | CX, CXL | 6 Cyl 3.8 L GAS
- Lucerne | 2006-2011 | CX, CXL, CXL Special Edition, CXS, Super | 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 4.6 L GAS
- Regal | 2011-2013 | CXL, GS, Premium | 4 Cyl 2.0 L FLEX
- Rendezvous | 2006-2007 | CX, CXL | 6 Cyl 3.5 L GAS
- Terraza | 2006-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
- Verano | 2013-2016 | Premium, Turbo | 4 Cyl 2.0 L GAS
View More
View related parts
Buick Purge Valve
Part Number: 12638819
$29.67 MSRP: $55.72
You Save: $26.05 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Canister Purge Valve; Purge Control Valve; Valve Assembly
- Replaces: 12617376
Fits the following Buick Models:
- LaCrosse | 2010-2016 | Base, Convenience, CX, CXL, Leather, Premium | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
- Regal | 2011-2017 | Base, CXL, Premium | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
- Verano | 2012-2017 | Base, Convenience, Leather, Premium, Sport Touring, Turbo | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View More
View related parts
Buick Vapor Canister
Part Number: 84080054
$132.27 MSRP: $248.43
You Save: $116.16 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Canister Assembly-Evaporator Emission; Solenoid
- Replaces: 13230482, 13413450, 22740534
Fits the following Buick Models:
- LaCrosse | 2010-2016 | Base, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Regal | 2014-2017 | Base, GS, Premium, Sport Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Vent Valve
Part Number: 10449092
$32.64 MSRP: $61.30
You Save: $28.66 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly-Evaporator Emission Canister Vent Solenoid; Valve, Fuel Tank Evaporator/Purge Control
Fits the following Buick Models:
- Rendezvous | 2002-2005 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
View related parts
Buick Solenoid Valve
Part Number: 10439027
$16.40 MSRP: $25.69
You Save: $9.29 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve Assembly-Evaporator Emission Canister Vent Solenoid; Vapor Canister Vent Solenoid; Control Valve; Fuel Tank Vent Valve; Vent Valve; Vapor Valve; Vent Control Solenoid
Fits the following Buick Models:
- Century | 2000-2005 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
- LaCrosse | 2005 | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
- Regal | 2000-2004 | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Solenoid Valve
Part Number: 19432156
$51.24 MSRP: $104.06
You Save: $52.82 (51%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly, Evaporator Emission Canister Purge Solenoid; Purge Valve; Purge Solenoid; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Replaced by: 19435149
- Replaces: 12591334, 12611801
Fits the following Buick Models:
- Enclave | 2008 | CX, CXL | 6 Cyl 3.6 L GAS
- LaCrosse | 2006-2008 | CXS | 6 Cyl 3.6 L GAS
View related parts
Buick Solenoid Valve
Part Number: 24574755
$27.18 MSRP: $84.81
You Save: $57.63 (68%)
ADD TO CART
Product Specifications
- Other Name: Valve Assembly-Auxiliary Evaporator Emission Canister Purge Solenoid; Vapor Canister Purge & Vent Solenoid; Control Valve; Fuel Tank Vent Valve; Vent Valve; Vent Control Solenoid; Valve; Valve, Fuel Tank Evaporator/Purge Control
Fits the following Buick Models:
- Century | 1997 | Custom, Limited | 6 Cyl 3.1 L GAS
- LeSabre | 1996-1999 | Custom, Limited | 6 Cyl 3.8 L GAS
- Regal | 1997 | GS, LS | 6 Cyl 3.8 L GAS
- Skylark | 1996-1998 | Custom, Gran Sport, Limited, Olympic Gold Edition | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View More
View related parts
Buick Solenoid Valve
Part Number: 1997203
Product Specifications
- Other Name: Valve Assembly-Fuel Vapor Canister Purge; EGR Vacuum Solenoid; EGR Valve; Purge Valve; Solenoid; Valve, Fuel Tank Evaporator/Purge Control
Fits the following Buick Models:
- Regal | 1988-1994 | Custom, Gran Sport, Limited | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Pressure Valve
Part Number: 17089068
Product Specifications
- Other Name: Valve Assembly-Fuel Vapor Pressure Control; Fuel Tank Vent Valve; Vapor Valve; Valve, Fuel Tank Evaporator/Purge Control
Fits the following Buick Models:
- Roadmaster | 1992-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.7 L GAS
View related parts
Buick Solenoid Valve
Part Number: 12571136
Product Specifications
- Other Name: Solenoid, Fuel Tank Evaporator/Purge Control; Vapor Canister Purge and Vent Solenoids; Purge Valve.; Purge Solenoid
Fits the following Buick Models:
- LaCrosse | 2005 | CXS | 6 Cyl 3.6 L GAS
View related parts
Buick Solenoid
Part Number: 25526954
Product Specifications
- Other Name: Valve Assembly, Evaporator Emission Canister Purge Solenoid; Solenoid, Early Fuel Evaporation Control; Solenoid, Fuel Vapor Canister Purge
Fits the following Buick Models:
- Century | 1984-1986 | Custom, Estate, Estate Wagon, Limited, Olympia Limited, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1986 | Custom, Limited | 6 Cyl 3.0 L GAS
- Skylark | 1985-1991 | Base, Custom, Gran Sport, Limited, Luxury Edition | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS
- Somerset | 1986-1987 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- Somerset Regal | 1985 | Base, Limited | 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View More
View related parts
Buick Purge Valve
Part Number: 17087069
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Activated Carbon Filter; Vapor Canister Purge Solenoid; Purge Valve; Solenoid; Valve, Thermos Vacuum
Fits the following Buick Models:
- Century | 1993 | Custom, Limited, Special | 4 Cyl 2.2 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Purge Valve
Part Number: 1997297
Product Specifications
- Other Name: Valve Assembly-Evaporator Emission Canister Purge Solenoid; Vapor Canister Vent Solenoid.; Purge Solenoid; Vapor Canister; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
Fits the following Buick Models:
- Century | 2000-2005 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
- Rendezvous | 2002-2005 | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
View related parts
Buick Check Valve
Part Number: 497853
Product Specifications
- Other Name: Valve Assembly - Check; Control Valve; Vacuum Valve; Fuel Evap/Purge; Early Evap; Emission Control; A/C Vac Control; A/C Control
Fits the following Buick Models:
- Skylark | 1994 | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Solenoid
Part Number: 17082416
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Solenoid, Early Fuel Evaporation Control
Fits the following Buick Models:
- Century | 1984-1992 | Custom, Estate Wagon, Limited, Special, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
View related parts
Buick Solenoid Valve
Part Number: 25536881
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; EGR Vacuum Solenoid; EGR Valve; Solenoid
Fits the following Buick Models:
- Regal | 1990-1992 | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Purge Valve
Part Number: 25526955
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Vapor Canister Vent Solenoid; Canister Purge Valve; Solenoid
Fits the following Buick Models:
- LeSabre | 1986-1988 | Base, Custom, Limited, T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick Purge Valve
Part Number: 25530972
Product Specifications
- Other Name: Valve, Fuel Tank Evaporator/Purge Control; Vapor Canister Purge and Vent Solenoids.; Purge Solenoid; Purge Control Valve; Solenoid
Fits the following Buick Models:
- LeSabre | 1992-1993 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1991-1995 | Base, Ultra | 6 Cyl 3.8 L GAS

| Page 1 of 2 |Next >

1-20 of 35 Results

Buick Canister Purge Valves Parts Questions & Experts Answers

PCV Valve
12608378
Q: How to replace the canister purge valves on Buick LaCrosse?
A: A vehicle owner must switch the ignition off before starting the replacement of the evaporative emission canister purge solenoid valve. Start by detaching the purge line from the purge valve solenoid and then separate the electrical connector of that solenoid. The next step requires removal of the solenoid and bolt from the Intake Manifold after purging the line from its manifold connection. Install the purge valve solenoid to the Intake Manifold then tighten the purge solenoid bolt to 10 n.m (89 lb in). Begin the installation by attaching the purge line to the purge valve solenoid's manifold side followed by reconnecting electrical connectivity and finishing with the purge line connection to the purge valve solenoid.
Solenoid Valve
1997278
Q: How to replace the canister purge valves on Buick LeSabre?
A: The first step to install a new EVAPORATIVE EMISSION (EVAP) CANISTER PURGE SOLENOID VALVE is to take off the fuel injector sight shield. Begin replacement of the EVAPORATIVE EMISSION (EVAP) CANISTER PURGE SOLENOID VALVE by disconnecting its harness connector and removing the vacuum hoses and purge pipe from the valve. Pull the tab located on the EVAP canister purge valve bracket to extract the valve. Mount the EVAP canister purge valve to the canister bracket after which connect purge pipe and vacuum hose to the valve. Finally, put the fuel injector sight shield back in before reconnecting the EVAP canister purge valve harness connector.
Solenoid Valve
13575703
Q: How to replace the canister purge valves on Buick Regal?
A: The starting point to replace the EVAP canister purge valves requires turning OFF the ignition and removing the fuel injector sight shield. First detach the evaporative emission canister purge valve harness connector followed by purge pipe removal and disconnecting the vacuum supply hose. Remove the EVAP canister purge valves upon releasing the retention bracket on its mounting bracket then check for carbon leaks from the valves. Cable harness installation should proceed by first mounting the new EVAP canister purge valves onto their bracket followed by reconnection of purge pipe and vacuum supply hoses and cable harness connector before reattaching the fuel injector sight shield.