Other Name: Bulb, Headlamp (High Beam); Headlight Bulbs; Car Bulbs; Headlight; Headlamp Bulb; High Beam; Composite Assembly; Fog Lamp/Turn Signal; Capsule Bulb
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1987-2005 Buick Century | Custom, Estate Wagon, Limited, Special, Special Edition | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1987-2005 Buick Century | Custom, Estate Wagon, Limited, Special, Special Edition | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS
Other Name: Bulb, Headlamp (High Beam); Headlight; Headlamps; Seal Beam, Capsule/Headlamp/Fog Lamp; Bulb, Sealed Beam.
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1986 Buick Century | Custom, Estate Wagon, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
Buick Century Headlight Bulb
Our website offers an extensive catalog of genuine Buick Century Headlight Bulb at unbeatable prices. Every OEM Buick Century Headlight Bulb comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Century Headlight Bulb Parts Questions & Experts Answers
Q: How to Replace a Headlight or Headlight Bulb on Buick Century?
A: To replace the headlamp assembly or headlamp bulb or cornering, sidemarker, park, and turn signal bulb, start by opening the hood. Tighten the lens-to-socket attachment by placing light pressure onto the headlamp lens as the retainers are removed. Next, pop up retainers off the headlamp with a pop and take off retainers. Next, unhook the headmounts from the slots on the upper fascia support and the fender reinforcement, and separated the head lamp electrical connector from the head lamp before taking it out. Trim the rubber access covers off from the rear of the headlamp bulb/sockets requiring replacement and rotate the headlamp bulb/socket counterclockwise to remove it, while maintaining a watch for the Halogen Bulb. Caution. Afternoon, pull the headlamp bulb/socket from the headlamp and undo the electrical connector. For installation, attach electrical connector to the headlamp bulb/socket then push the headlamp bulb/socket into the headlamp and twist clockwise for seating. Install the rubber access covers, connect the electrical connector to the headlamp, and install the headlamp mounting tabs into the slots. Use a light pressure on the head lamp lens during installation of the retainers while aligning them over the mounting tabs and a firm press down for the fully seating in position. Check the headlamp for free movement and inspect the headlamp aim if a new lamp or if some service or repair has potentially affected the mounting brackets. Finally, close the hood.