Q: How should the cruise control module be serviced as a complete unit on Buick Century?
A: The cruise control module, which is installed to the left strut tower, needs to be serviced as a complete unit. Start by taking off the cruise control cable from the cruise control module followed by disconnecting the electrical connector. Next, the cruise control module retaining nuts should be removed from the shock tower. For installation, mount the cruise control module to shock tower mounting studs while adhering to Fastener Notice in Service Precautions. Secure the module with retaining nuts then tighten them to 2 N.m (18 lb in). Then reconnect the electrical connector to sigma cruise control module and also reinstall the cruise control cable.
Q: How to replace the cruise control module on Buick Regal?
A: Begin replacement of the cruise control module by extracting the cruise control cable from its installation position at the left strut tower. The complete unit comprising the module and cable needs servicing. The first step involves both disconnecting the electrical connector at the cruise control module and removing the shock tower retaining nuts. The cruise control module installation requires attachment to shock tower mounting studs by retaining nuts which should be tightened to 2 N.m (18 lb in) following Service Precautions Fastener Notice. Reconnect the electrical connector to the cruise control module while you reinstall the cruise control cable.
Q: How to replace the cruise control module on Buick LeSabre?
A: Go ahead and disconnect the cruise control cable as well as the electrical connector to replace the module for cruise control. Now unfasten the cruise control module bracket retaining screws (1, 3) and extract the cruise control module and bracket assembly from the left-hand side of the vehicle. The cruise control module should then be removed to the bracket fasteners and cruise control module pulled from the bracket. For installation, mount the cruise control module to the bracket, then fasten the module to bracket fasteners, tightening to 7.5 N.m (66 lb in). Replace the cruise control module and bracket assembly to the vehicle and tighten with module retaining fasteners (1, 3) at 9 N.m (80 lb in). Reconnect electrical connector ,and cruise control cable, also, regardless of replacement, the cruise control cable does not require mechanical adjustment, the module within the system adjusts the cable. Finally, inspect the component operation.