How to replace the emblem/nameplate on Buick LeSabre?

The first step to handle the LeSabre emblem/nameplate panel is cleaning both parts with a soapy water blend and then drying them with a new cloth. Apply 3M General Purpose Adhesive Cleaner 08984 or its equivalent to completely take off gland from both panel and backside of emblem/nameplate. Apply your clean cloth to wipe any dirt from the surface before applying water and alcohol. Place masking tape or a magnet on the proper spot for the emblem/nameplate on the outer panel with both edges at marked distances from the facial molding top and outside panel edge. Heat the panel to 21°C using a heatgun or lamp when ambient temperature drops below that mark. When needed install double-coated automotive attachment tape from 3M like 3M 06380 with white backing and 3M 06377 for black backed patches or 3M 06382 gray backed material and similar products. Press the emblem/nameplate against the fixed panel surface until the adhesive bonds correctly. For the Tri-Shield emblem replacement begin with the normal washing drying and adhesive removal process. Use double-coated acrylic foam tape on the emblem/nameplate after you warm both components below 21°C (70°F) in need. Press the emblem's pin into the panel hole until it fixes tightly in the correct location.

OEM Buick LeSabre Emblem

Badge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

40 Emblems found

View related parts
Buick LeSabre Emblem
Part Number: 25551195
Product Specifications
- Other Name: Emblem, Wheel Cover Appearance; Wheel Center Cap
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Emblem, Front
Part Number: 25554775
Product Specifications
- Other Name: Emblem, Radiator Grille And Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Emblem, Rear
Part Number: 25630932
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Cap
Part Number: 22532104
Product Specifications
- Other Name: Emblem-Wheel Trim Cover; Wheel Center Cap; Lock; Emblem; Emblem, Wheel Cover Appearance; Insert, Wheel Cover Appearance
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1991 Buick LeSabre | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Nameplate, Passenger Side
Part Number: 1254540
Product Specifications
- Other Name: Emblem-Front Fender; Plate, Front Fender Name
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Buick LeSabre | Collector's Edition, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Nameplate
Part Number: 25551315
Product Specifications
- Other Name: Plate Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Emblem, Front
Part Number: 25620796
Product Specifications
- Other Name: Emblem, Front Fender Name
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Nameplate, Front
Part Number: 25506087
Product Specifications
- Other Name: Plate, Radiator Grille And Front End Ornamentation; Nameplate, Front End Ornamentation
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Buick LeSabre | Collector's Edition, Custom, Estate Wagon, Limited | 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Nameplate
Part Number: 25667560
Product Specifications
- Other Name: Emblem, Instrument Panel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Custom | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Emblem, Rear
Part Number: 20157850
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem, Rear Compartment Lid And Rear End Panel; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Buick LeSabre | Collector's Edition, Custom, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Nameplate
Part Number: 25667561
Product Specifications
- Other Name: Emblem, Instrument Panel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Buick LeSabre | Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Nameplate, Rear
Part Number: 20007697
Product Specifications
- Other Name: Plate, Rear Quarter Panel; Plate "Limited" (A Body); Plate (X, A, E, H Bodies); Nameplate (A Body)
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Nameplate, Rear
Part Number: 1701932
Product Specifications
- Other Name: Plate Assembly, Rear Compartment Lid Name; Plate Assembly "Buick", Rear Compartment Lid & End Panel; Nameplate Package, Front End Ornamentation; Tailgate Plate.
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Buick LeSabre | Custom, Estate Wagon, Limited | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Emblem
Part Number: 22533743
Product Specifications
- Other Name: Plate; Nameplate; Plate, Front Fender Name
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987 Buick LeSabre | T-Type | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Nameplate, Rear
Part Number: 25544632
Product Specifications
- Other Name: Plate, Rear Quarter Panel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Buick LeSabre | Limited | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Nameplate, Rear
Part Number: 20472200
Product Specifications
- Other Name: Plate, Rear End Panel And Tailgate; Plate,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Buick LeSabre | Base, Collector's Edition, Custom, Limited, T-Type | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Emblem, Rear
Part Number: 20737230
Product Specifications
- Other Name: Emblem, Rear Compartment Lid, Rear End Panel And Tailgate; Emblem,Rear End Panel And Tailgate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1989 Buick LeSabre | Custom | 6 Cyl 3.8 L GAS
View related parts
Buick LeSabre Nameplate, Rear
Part Number: 20108450
Product Specifications
- Other Name: Plate, Rear Quarter Name; Plate, Rear Quarter Panel Upper (A - Body); Extension, Rear Quarter Side Outer; Plate, Quarter Panel (X - Body)
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Buick LeSabre | Custom, Limited | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Emblem
Part Number: 20096975
Product Specifications
- Other Name: Emblem, Roof Side; Emblem, Roof Panel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Buick LeSabre | Collector's Edition, Custom, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick LeSabre Stud Plate
Part Number: 25526371
Product Specifications
- Other Name: Plate Assembly, Bumper; Absorber Plate; Energy Absorber Mount Plate; Reinforcement Mount Plate; Impact Bar Stud Plate; Bumper Plate Assembly.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1985 Buick LeSabre | Collector's Edition, Custom, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL

| Page 1 of 2 |Next >

1-20 of 40 Results

Buick LeSabre Emblem

Our website offers an extensive catalog of genuine Buick LeSabre Emblem at unbeatable prices. Every OEM Buick LeSabre Emblem comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick LeSabre Emblem Parts Questions & Experts Answers

Nameplate
25667561
Q: How to replace the emblem/nameplate on Buick LeSabre?
A: The first step to handle the LeSabre emblem/nameplate panel is cleaning both parts with a soapy water blend and then drying them with a new cloth. Apply 3M General Purpose Adhesive Cleaner 08984 or its equivalent to completely take off gland from both panel and backside of emblem/nameplate. Apply your clean cloth to wipe any dirt from the surface before applying water and alcohol. Place masking tape or a magnet on the proper spot for the emblem/nameplate on the outer panel with both edges at marked distances from the facial molding top and outside panel edge. Heat the panel to 21°C using a heatgun or lamp when ambient temperature drops below that mark. When needed install double-coated automotive attachment tape from 3M like 3M 06380 with white backing and 3M 06377 for black backed patches or 3M 06382 gray backed material and similar products. Press the emblem/nameplate against the fixed panel surface until the adhesive bonds correctly. For the Tri-Shield emblem replacement begin with the normal washing drying and adhesive removal process. Use double-coated acrylic foam tape on the emblem/nameplate after you warm both components below 21°C (70°F) in need. Press the emblem's pin into the panel hole until it fixes tightly in the correct location.

Related Buick LeSabre Parts

Browse Buick LeSabre Emblem by Years

2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 1988 1987 1986 1985 1984