ChevyParts
My Garage
My Account
Cart
OEM Buick Park Avenue Throttle Cable
Accelerator Throttle Cable- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
8 Throttle Cables found
Buick Park Avenue Throttle Cable
Our website offers an extensive catalog of genuine Buick Park Avenue Throttle Cable at unbeatable prices. Every OEM Buick Park Avenue Throttle Cable comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Buick Park Avenue Throttle Cable Parts Questions & Experts Answers
- Q: How to replace the throttle cable on Buick Park Avenue?A: Starting the Throttle Cable replacement requires removal of the left closeout/insulator panel. First remove the Throttle Cable from the accelerator pedal lever before utilizing the Throttle Cable cover tangs to push through the bulkhead. The process begins with cable removal from both the retaining clip and from the right slot positioned above the washer bottle. Separate the Throttle Cable ends by unhooking them from the Throttle Body lever and from the Throttle Cable bracket. Secure all flexible components properly to avoid interference when they are located less than 50 mm (2 in) from moving components. Use the bulkhead to install the Throttle Cable before putting the snap retainer through the bulkhead. The accelerator pedal lever has an open slot which the installer must insert the Throttle Cable until the cable end correctly snaps into place and establishes full contact with the accelerator control pedal lever. After inserting the dash panel insulator retainer into the Throttle Cable it must be pushed over the cable lever end fitting until it secures on the cable dash fitting flange while fitting tightly against the dash mat. Operation of the accelerator pedal should ensure a smooth throttle movement between entire throttle ranges as well as proper carpet positioning under the pedal. First double-check that the cable hook sits underneath the Throttle Body lever. After that install the Throttle Body lever segment of the Throttle Cable followed by running the cable to the bracket then to the slot on top of the washer bottle then secure it with the retaining clip. After reinstall the left closeout/insulator panel as the final step.
Related Buick Park Avenue Parts
Buick Park Avenue Cruise Control Servo
Buick Park Avenue Cruise Control Switch
Buick Park Avenue Fuel Filler Hose
Buick Park Avenue Fuel Injector
Buick Park Avenue Fuel Level Sensor
Buick Park Avenue Fuel Pressure Regulator
Buick Park Avenue Fuel Pump Driver Module
Buick Park Avenue Fuel Rail
Buick Park Avenue Fuel Tank
Buick Park Avenue Fuel Tank Sending Unit
Buick Park Avenue Fuel Tank Strap
Buick Park Avenue Idle Control Valve