How to replace the rear wheel bearing on Cadillac Escalade ESV?

To change the rear Wheel Hub and bearing, first, lift the vehicle and remove the tire, and wheel off. Then, disconnect the outer tie rod from the Steering Knuckle and take out the brake rotor. Next carefully go ahead and remove the axle nut dust cover on the wheel drive shaft. After this remove the cotter pins along with the wheel drive shaft retainer that is attached to the wheel drive shaft retaining nut. Unfasten Wheel Hub and bearing retaining bolts and disconnect the wheel drive shaft and axel hub and bearing, by use of the axle remover (J 45859). Following that, remove the Wheel Hub and bearing from the vehicle. For installation, mount the new Wheel Hub and bearing onto the vehicle by fastening it using the retaining bolts with a torque of 140 nm (103 ft. Lbs.). Afterwards, the wheel drive shaft retaining nut is to be installed and tightened to 250 nm (184 ft. Lbs.) followed by the retainer and the cotter pin to the wheel drive shaft nut. Lastly, install the dust cap, reinstall the outer tie rod to the Steering Knuckle, reinstall the brake rotor, put the tire and wheel back on, and lower the vehicle.

OEM Cadillac Escalade ESV Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Wheel Bearings found

View related parts
Cadillac Escalade ESV Wheel Bearing, Rear
Part Number: 12479031
$49.62 MSRP: $96.32
You Save: $46.70 (49%)
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Axle Shaft; Wheel Bearing Kit; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Wheel
- Position: Rear
- Replaces: 09442126, 9442126
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Output Shaft Bearing, Front
Part Number: 26066885
$30.31 MSRP: $56.92
You Save: $26.61 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Differential Pinion Bearing; Wheel Bearing; Axle Bearing; Inner Pinion Bearing; Bearing, Front Axle And Axle Center
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020, 2003-2005 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Wheel Bearing
Part Number: 9439561
$72.53 MSRP: $131.28
You Save: $58.75 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rear Wheel Bearing; Axle Bearing; Axle Bearings; Shaft Bearings; Outer Bearing; Bearing; Bearing, Rear Axle Shaft; Bearing, Rear Wheel
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Wheel Bearing
Part Number: 9436881
$76.25 MSRP: $145.36
You Save: $69.11 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Wheel Bearing
Part Number: 9428908
$69.42 MSRP: $98.04
You Save: $28.62 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel Outer; Axle Bearings, Shaft Bearings, Grease Cap, Outer Bearing, Bearing Assembly, Front Wheel Outer, Rear Wheel.
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Hub Assembly
Part Number: 84869190
$180.30 MSRP: $349.94
You Save: $169.64 (49%)
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel (W/ Bearing & Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Front Hub & Bearing; Front Hub; Hub & Bearing; Hub, Front Wheel; Hub, Rear Wheel
- Position: Front
- Replaced by: 85689422
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Axle Bearings, Front
Part Number: 23243752
$10.42 MSRP: $18.60
You Save: $8.18 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Front Differential; Wheel Bearing; Axle Bearing; Output Shaft Bearing; Bearing, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Front Hub
Part Number: 84856653
$238.85 MSRP: $463.56
You Save: $224.71 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel (W/ Bearing & Wheel Speed Sensor); Wheel Hub Repair Kit; Wheel Bearing; Axle Bearing; Wheel Hub; Hub & Bearing; Hub, Front Wheel
- Position: Front
- Replaces: 10393170, 20883242, 84356642, 25819677, 22841380
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Front Hub
Part Number: 15233113
Product Specifications
- Other Name: Hub, Front Wheel (W/Wheel Speed Sensor); Wheel Bearing & Hub Assembly; Repair Kit; Axle Bearing.; Hub & Bearing; Hub
- Position: Front
- Replaces: 15112382, 15134584, 15740291
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Hub Assembly
Part Number: 13536121
$128.62 MSRP: $230.70
You Save: $102.08 (45%)
Product Specifications
- Other Name: Hub, Rear Wheel (W/Bearing); Wheel Hub; Rear Hub & Bearing; Hub, Rear Wheel
- Replaced by: 13549865
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS

Cadillac Escalade ESV Wheel Bearing

Our website offers an extensive catalog of genuine Cadillac Escalade ESV Wheel Bearing at unbeatable prices. Every OEM Cadillac Escalade ESV Wheel Bearing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade ESV Wheel Bearing Parts Questions & Experts Answers

Wheel Bearing
9439561
Q: How to replace the rear wheel bearing on Cadillac Escalade ESV?
A: To change the rear Wheel Hub and bearing, first, lift the vehicle and remove the tire, and wheel off. Then, disconnect the outer tie rod from the Steering Knuckle and take out the brake rotor. Next carefully go ahead and remove the axle nut dust cover on the wheel drive shaft. After this remove the cotter pins along with the wheel drive shaft retainer that is attached to the wheel drive shaft retaining nut. Unfasten Wheel Hub and bearing retaining bolts and disconnect the wheel drive shaft and axel hub and bearing, by use of the axle remover (J 45859). Following that, remove the Wheel Hub and bearing from the vehicle. For installation, mount the new Wheel Hub and bearing onto the vehicle by fastening it using the retaining bolts with a torque of 140 nm (103 ft. Lbs.). Afterwards, the wheel drive shaft retaining nut is to be installed and tightened to 250 nm (184 ft. Lbs.) followed by the retainer and the cotter pin to the wheel drive shaft nut. Lastly, install the dust cap, reinstall the outer tie rod to the Steering Knuckle, reinstall the brake rotor, put the tire and wheel back on, and lower the vehicle.

Related Cadillac Escalade ESV Parts

Browse Cadillac Escalade ESV Wheel Bearing by Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003