How to replace the drive pinion bearings on an 8.6 Inch Axle on Cadillac Escalade?

Start drive Pinion Bearing replacement on 8.6 inch axle by raising and supporting the vehicle. Divide the vehicle from the ground and then eliminate both the Differential assembly and the Differential drive pinion gear assembly. The dt 47688 (Pinion Bearing Remover) and a press should be used along with the 8.6 inch axle to extract the drive Pinion Bearing in combination with the spacer. When working on the 9.5ld inch axle you should use both the j 22912-b (Bearing Puller) and a press in order to achieve the removal task. A hammer combined with a brass drift should gently extract the outer Pinion Bearing cup from axle housing by rotating it evenly. The same procedure should be repeated for the inner Pinion Bearing cup installation. The assembly process starts with using the j 8092 and j 8611-01 tools to install first the outer then the inner Pinion Bearing cups through the application of the j 8092 (Universal Drive Handle 3/4 in-10) and j 45870 (Inner Pinion Bearing Race Installer). Establish the required thin piece of shim material for the drive pinion before placing it onto the Differential drive pinion gear. A hammer along with either the j 22828 input shaft gear installer or the j 36614 inner Pinion Bearing installer will install the inner Pinion Bearing until it sits properly on the drive pinion shim. Place a new collapsible spacer and apply axle lubricant to the pinion bearings. The Differential drive pinion gear should receive the outer Pinion Bearing before installing the drive pinion flange/yoke or oil seal. The rotating torque of the drive pinion needs to be measured for used bearings at 1.0-2.3 nm (10-20 lb in) and for new bearings at 1.7-3.4 nm (15-30 lb in). Small pinion nut tightening should be performed until the required torque measurements are met. Torque the pinion once to seat the bearings before re-examining the torque values if required. After install the Differential assembly you should fill the axle with lubricant then take off the support while lowering the vehicle.

OEM Cadillac Escalade Pinion Bearing

Transmission Pinion Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

23 Pinion Bearings found

View related parts
Cadillac Escalade Pinion Bearings, Rear Part Number: 22943106
$71.56 MSRP: $138.90
You Save: $67.34 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Drive Pinion Rear And Intermediate; Differential Pinion Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pinion Bearings Part Number: 454021
$161.60 MSRP: $292.48
You Save: $130.88 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear; Differential Pinion Bearing; Rear Pinion Bearing; Inner Pinion Bearing; Differential Drive Pinion; Rear Wheel Bearing.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006, 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Pinion Bearings, Outer Part Number: 22943108
$35.57 MSRP: $69.63
You Save: $34.06 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Axle Bearing; Outer Bearing; Front Pinion Bearing; Bearing, Pinion Shaft Front
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pinion Bearings, Inner Part Number: 457108
$56.11 MSRP: $154.36
You Save: $98.25 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Rear Pinion Bearing; Front Pinion Bearing; Inner Pinion Bearing; Differential Drive Pinion Bearings.
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2013 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Side Bearings Part Number: 25824250
$73.65 MSRP: $142.94
You Save: $69.29 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing
- Replaces: 09418390, 9418390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2016 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Wheel Bearing Part Number: 9436881
$80.31 MSRP: $145.36
You Save: $65.05 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential; Differential Pinion Bearing; Differential Bearing; Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006, 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Side Bearings Part Number: 11505123
$57.30 MSRP: $169.58
You Save: $112.28 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Pinion Bearing; Differential Bearing; Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2013, 1999-2000 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pinion Seal, Outer Part Number: 25824252
$50.05 MSRP: $97.14
You Save: $47.09 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Pinion Bearings; Side Bearings; Bearing; Bearing, Pinion Shaft Front
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade Pinion Bearings Part Number: 9413427
$56.84 MSRP: $109.76
You Save: $52.92 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear, Front, Outer Pinion Bearings; Differential Drive, Steering Knuckle King, Pinion Shaft, Front Axle Bearings.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2020 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pinion Bearings Part Number: 23243839
$72.64 MSRP: $142.22
You Save: $69.58 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Pinion; Differential Pinion Bearing; Rear Pinion Bearing; Front/Inner/Outer Pinion; Diff/Drive Axle; Pinion/Clutch/Rear Wheel
- Position: Front
- Replaces: 09418357, 26053758, 9418357, 15286375, 20997052, 22786621, 9418356, 09418356, 12479221
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2023 Cadillac Escalade | 5.3L V8, 6.0L V8
- 1999-2000 Cadillac Escalade
View related parts
Cadillac Escalade Pinion Bearings, Outer Part Number: 15534483
$53.12 MSRP: $94.85
You Save: $41.73 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly, Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Front Pinion Bearing; Bearing, Differential Pinion; Bearing, Pinion Shaft Front
- Position: Outer
- Replaces: 09440836, 9440836
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Pinion Bearings, Rear Part Number: 84881466
$67.00 MSRP: $119.64
You Save: $52.64 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Drive Pinion Rear And Intermediate; Differential Pinion Bearing; Differential Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pinion Bearings Part Number: 84428299
$24.40 MSRP: $45.81
You Save: $21.41 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Pinion; Differential Pinion Bearing; Front Pinion Bearing
- Position: Front
- Replaced by: 85722137
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pinion Bearings, Front Outer Part Number: 84428300
$13.92 MSRP: $26.14
You Save: $12.22 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Front Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear Pinion Bearing; Bearing, Differential Pinion
- Position: Front Outer
- Replaced by: 85722136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pinion Bearings, Outer Part Number: 22943109
$45.75 MSRP: $88.79
You Save: $43.04 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Axle Bearing; Outer Bearing; Bearing, Pinion Shaft Front
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Side Bearings Part Number: 22786619
$126.72 MSRP: $245.94
You Save: $119.22 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Side Gear; Differential Bearing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pinion Bearings Part Number: 9414917
$70.11 MSRP: $133.08
You Save: $62.97 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Differential Drive Pinion Gear Inner; Differential Pinion Bearing; Differential Bearing; Rear Pinion Bearing; Drive Pinion Rear; Axle Pinion Shaft; Ring And Pinion; Pinion Shaft Front.
- Position: Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Pinion Bearings Part Number: 9413168
$93.86 MSRP: $167.61
You Save: $73.75 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly-Roller; Differential Pinion Bearing; Rear Pinion Bearing; Front Pinion Bearing; Drive Pinion Bearing Assembly.
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2005 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Pinion Bearings, Rear Part Number: 22943107
$57.28 MSRP: $157.48
You Save: $100.20 (64%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Drive Pinion Rear And Intermediate; Differential Pinion Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pinion Bearings Part Number: 9417781
$43.86 MSRP: $103.28
You Save: $59.42 (58%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Differential Drive Pinion Gear Outer; Differential Pinion Bearing; Rear, Front, Outer Pinion Bearing; Differential Drive Pinion Front, Drive Pinion, Pinion Shaft Front, Front Axle
- Position: Front Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2013, 1999-2000 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

| Page 1 of 2 |Next >

1-20 of 23 Results

Cadillac Escalade Pinion Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Pinion Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade Pinion Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Pinion Bearing of the Cadillac Escalade serves as an important performance component which assures proper functioning of the Escalade's differential system. Affective Pinion Bearing maintains the pinion gear when it passes driveshaft power to wheels thereby sustaining Cadillac Escalade system reliability and longevity. The Pinion Bearing works with different models of Escalade to simultaneously improve vehicle performance while enhancing safety when the bearing operates properly thus reducing both noise production and structural damage to attached parts. Regular maintenance that involves PINION BEARING checks and regular application of lubrication is essential for avoiding expensive maintenance issues which ensure peak performance levels. Cadillac Escalade claims its position in the automotive category through luxurious specifications and advanced features highlighted by the fifth-generation Super Cruise self-driving system that operates without driver involvement. The Pinion Bearing exemplifies Cadillac's dedication to quality thus helping the car maintain its market position as an effective full-size luxury SUV in its class. The Cadillac model offers drivers an outstanding experience because it has powerful engine choices along with independent rear suspension and a reliable Pinion Bearing to provide safety and luxury with efficiency.

Cadillac Escalade Pinion Bearing Parts Questions & Experts Answers

Pinion Bearings, Inner
457108
Q: How to replace the drive pinion bearings on an 8.6 Inch Axle on Cadillac Escalade?
A:
Start drive Pinion Bearing replacement on 8.6 inch axle by raising and supporting the vehicle. Divide the vehicle from the ground and then eliminate both the Differential assembly and the Differential drive pinion gear assembly. The dt 47688 (Pinion Bearing Remover) and a press should be used along with the 8.6 inch axle to extract the drive Pinion Bearing in combination with the spacer. When working on the 9.5ld inch axle you should use both the j 22912-b (Bearing Puller) and a press in order to achieve the removal task. A hammer combined with a brass drift should gently extract the outer Pinion Bearing cup from axle housing by rotating it evenly. The same procedure should be repeated for the inner Pinion Bearing cup installation. The assembly process starts with using the j 8092 and j 8611-01 tools to install first the outer then the inner Pinion Bearing cups through the application of the j 8092 (Universal Drive Handle 3/4 in-10) and j 45870 (Inner Pinion Bearing Race Installer). Establish the required thin piece of shim material for the drive pinion before placing it onto the Differential drive pinion gear. A hammer along with either the j 22828 input shaft gear installer or the j 36614 inner Pinion Bearing installer will install the inner Pinion Bearing until it sits properly on the drive pinion shim. Place a new collapsible spacer and apply axle lubricant to the pinion bearings. The Differential drive pinion gear should receive the outer Pinion Bearing before installing the drive pinion flange/yoke or oil seal. The rotating torque of the drive pinion needs to be measured for used bearings at 1.0-2.3 nm (10-20 lb in) and for new bearings at 1.7-3.4 nm (15-30 lb in). Small pinion nut tightening should be performed until the required torque measurements are met. Torque the pinion once to seat the bearings before re-examining the torque values if required. After install the Differential assembly you should fill the axle with lubricant then take off the support while lowering the vehicle.