How to replace the water pump on 4.8L, 5.3L, and 6.0L engines on Cadillac Escalade?

Before handling 4.8l, 5.3l, and 6.0l Water Pump replacements you must drain the cooling system. Open the air intake duct clamps at both the Throttle Body and the maf/iat sensor before unpacking the radiator inlet hose from the outlet duct and removing the air intake outlet duct. When necessary detach the engine sight shield. Unclipped the vent inlet Radiator Hose then put the Water Pump hose clamp at the new position and extracted the hose. Quit the Fan Blade and disconnect the accessory Drive Belt. Take off the outlet hose through its clamp and afterward the surge tank outlet hose along its clamp and heater inlet hose with its clamp. Lift out the Water Pump by removing its bolts before replacing all gaskets with new ones. You must install new gaskets on the clean surfaces before fitting the Water Pump. Use 15 nm torque before tightening Water Pump bolts to 30 nm. Put back the heater inlet hose and its clamp onto the surge tank outlet hose and its clamp together with the outlet hose and its clamp. Put on the accessory Drive Belt and install the Fan Blade along with its inlet hose that has its installed clamp. You can reconnect the engine vent inlet hose to its place on the Radiator Hose fasteners before reinstalling the engine sight shield if needed. Position the arrow mark of the outlet air duct over the Throttle Body fastener before screwing it into place. Join the radiator inlet hose clip to the outlet duct last and use 62 inch lbs torque when tightening the clamps around the throat body and the maf sensor system.

OEM Cadillac Escalade Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Water Pumps found

View related parts
Cadillac Escalade Water Pump Part Number: 12685257
$288.51 MSRP: $559.94
You Save: $271.43 (49%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Water (W/Manifold); Water Pump Assembly; Pump, Engine Coolant
- Replaces: 12674640, 12671394, 12681258
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Water Pump Part Number: 89060527
$232.95 MSRP: $456.07
You Save: $223.12 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Water; Water Pump Assembly; Pump Kit, Engine Coolant
- Replaces: 12528917, 89017748, 12532528
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Water Pump Part Number: 12692045
$120.21 MSRP: $233.32
You Save: $113.11 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit-Water; Pump Kit, Engine Coolant
- Replaces: 12683012
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Water Pump Part Number: 12681417
$289.52 MSRP: $561.92
You Save: $272.40 (49%)
ADD TO CART
Product Specifications
- Other Name: Pump Kit-Water; Pump Kit, Engine Coolant
- Replaced by: 19434033
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2014 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade Water Pump Part Number: 15076931
$139.53 MSRP: $244.78
You Save: $105.25 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Engine Coolant; Engine Auxiliary Water Pump; Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Water Pump Part Number: 12713806
$72.11 MSRP: $128.76
You Save: $56.65 (44%)
ADD TO CART
Product Specifications
- Other Name: Pump Kit-Water
- Replaced by: 12716504
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 6 Cyl 3.0 L DIESEL
View related parts
Cadillac Escalade Water Pump Part Number: 12712953
$248.33 MSRP: $481.95
You Save: $233.62 (49%)
ADD TO CART
Product Specifications
- Other Name: Water Pump Assembly
- Replaced by: 12724894
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Water Pump Part Number: 12708893
$207.49 MSRP: $406.24
You Save: $198.75 (49%)
ADD TO CART
Product Specifications
- Other Name: Water Pump Assembly; Pump, Engine Coolant
- Replaced by: 12724892
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Pump Assembly Part Number: 25880378
$191.14 MSRP: $342.86
You Save: $151.72 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Engine Coolant; Engine Auxiliary Water Pump; Water Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Cadillac Escalade Water Pump Assembly Part Number: 12725191
$905.66 MSRP: $1631.82
You Save: $726.16 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Water (W/Manifold); Pump, Engine Coolant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Water Pump Part Number: 12725187
$195.74 MSRP: $351.10
You Save: $155.36 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Engine Coolant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade | V | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Water Pump Part Number: 89018166
Product Specifications
- Other Name: Pump Kit, Water; Water Pump Assembly
- Replaces: 12458935, 12456113, 88894290, 89017439, 89018040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Water Pump Part Number: 12600767
Product Specifications
- Other Name: Pump, Water; Engine Water Pump; Water Pump Assembly
- Replaces: 12587305
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2010 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Water Pump Part Number: 15293032
$177.72 MSRP: $318.78
You Save: $141.06 (45%)
Product Specifications
- Other Name: Pump, Engine Coolant; Pump; Pump, Heater
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)

Cadillac Escalade Water Pump

Want to cut long-term maintenance and repair costs? Choose OEM Water Pump. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade Water Pump includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Cadillac Escalade vehicles have the Water Pump thathelps in controlling engine temperature, through circulating coolant and passing through the throttle body and to the heater core. This circulation enables heat to be transfer from the engine to radiator then where it dissipates and does not over heat. The pump which is part of the weak is comprised by the shaft, impeller, bearings and seals to guard the bearings from the coolant. These water pumps have not been of the same style for many years but the basics of the Escalade water pump have remained the same. Some of the general problems include damaged bearings and seals due to wear and tear and thus cause leakage and overheating. There are several symptoms to a failing water pump and these include; the water pump coolant leaks, unusual noises and warning lights on the dashboard. Daily inspections are crucial, for instance if the pump is leaking, the seals have to be adjusted and tightened to increase the pump's durability and the engine's performance.

Cadillac Escalade Water Pump Parts Questions & Experts Answers

Water Pump
89018166
Q: How to replace the water pump on 4.8L, 5.3L, and 6.0L engines on Cadillac Escalade?
A:
Before handling 4.8l, 5.3l, and 6.0l Water Pump replacements you must drain the cooling system. Open the air intake duct clamps at both the Throttle Body and the maf/iat sensor before unpacking the radiator inlet hose from the outlet duct and removing the air intake outlet duct. When necessary detach the engine sight shield. Unclipped the vent inlet Radiator Hose then put the Water Pump hose clamp at the new position and extracted the hose. Quit the Fan Blade and disconnect the accessory Drive Belt. Take off the outlet hose through its clamp and afterward the surge tank outlet hose along its clamp and heater inlet hose with its clamp. Lift out the Water Pump by removing its bolts before replacing all gaskets with new ones. You must install new gaskets on the clean surfaces before fitting the Water Pump. Use 15 nm torque before tightening Water Pump bolts to 30 nm. Put back the heater inlet hose and its clamp onto the surge tank outlet hose and its clamp together with the outlet hose and its clamp. Put on the accessory Drive Belt and install the Fan Blade along with its inlet hose that has its installed clamp. You can reconnect the engine vent inlet hose to its place on the Radiator Hose fasteners before reinstalling the engine sight shield if needed. Position the arrow mark of the outlet air duct over the Throttle Body fastener before screwing it into place. Join the radiator inlet hose clip to the outlet duct last and use 62 inch lbs torque when tightening the clamps around the throat body and the maf sensor system.