Other Name: Fuse (Package) , 7.5A *Brown* *Tan; Battery Fuse; Fuse, Main Wiring Junction And Fuse Block; Fuse, Chassis Electrical; Fuse, Wiring Junction; Standard Parts; Fuse, Fuse
Replaces: 12004006
Fits the following Cadillac Models:
Escalade | 2021-2023 | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
Escalade ESV | 2021-2023 | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
| Page 1 of 6 |Next >
1-20 of 113 Results
Cadillac Fuse
Choose OEM Fuse, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsGiant.com, you'll find it easy to get top-quality OEM Cadillac Fuse. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the 175 Amp Mega Fuse with TP2 on Cadillac Escalade?
A:
The replacement of the 175 amp mega Fuse with tp2 requires one to first disconnect the negative Battery Cable. Before replacing the Fuse you should remove the solenoid terminal from the Fuse stud then disconnect the starter solenoid cable terminal and the starter solenoid cable nut. Begin by removing the generator battery jumper cable to Fuse nut and then its terminal from the Fuse stud before taking off the positive Battery Cable terminal from the same stud. Place the new Fuse into the holder after removing it from the holder. Reinstall the positive Battery Cable terminal onto the Fuse stud and then attach the generator battery jumper cable terminal to the same Fuse stud. Fasten the generator battery jumper cable to Fuse nut by tightening it at 15 nm (11 lb ft). Start by attaching the starter solenoid cable terminal to the Fuse stud and fasten it with the starter solenoid cable nut while reaching a torque of 15 nm (11 lb ft). The repair ends with return of the Fuse cover and connection of the negative Battery Cable.