ChevyParts
My Garage
My Account
Cart
OEM Cadillac SRX Alternator
Generator- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Alternators found
Cadillac SRX Alternator
Part Number: 84009371$225.63 MSRP: $685.46You Save: $459.83 (68%)Ships in 1-3 Business Days
Cadillac SRX Alternator
Part Number: 22988006$329.43 MSRP: $688.32You Save: $358.89 (53%)Ships in 1-2 Business Days
Cadillac SRX Alternator
Part Number: 84009373$372.71 MSRP: $821.99You Save: $449.28 (55%)Ships in 1-2 Business Days
Cadillac SRX Alternator
Part Number: 13520825$219.92 MSRP: $485.01You Save: $265.09 (55%)Ships in 1-2 Business Days
Cadillac SRX Alternator
Our website offers an extensive catalog of genuine Cadillac SRX Alternator at unbeatable prices. Every OEM Cadillac SRX Alternator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac SRX Alternator Parts Questions & Experts Answers
- Q: How to replace the alternator (LAU) on Cadillac SRX?A: Start by disconnecting the negative Battery Cable. Next, remove the Drive Belt. Detach the engine harness electrical connector from the generator terminal before relocating the positive cable boot to the generator terminal. Use a wrench to uninstall the generator's positive Battery Cable terminal and positive Battery Cable nut. Commence by removing the idler pulley bolt followed by the idler pulley then proceed to take off the generator bolts. The generator extraction process occasionally requires vehicle maneuvering to pull it out completely. Locate the generator where it needs to sit on the engine and apply gentle torque to generator bolts during installation. Fasten the new idler pulley after which you should tighten the generator bolts to 58 nm (43 lb ft) using the prescribed order. The installation process includes placing the Drive Belt then connecting the engine harness electrical connector to the generator before attaching the positive Battery Cable terminal to the generator. Fasten the generator nut for the positive Battery Cable by tightening it to 15 nm (11 lb ft) then relocate the positive Battery Cable boot to the generator terminal. Reconnect the negative Battery Cable during the final procedure.
