How to replace the parking brake backing plate on Cadillac STS?

The procedure to change the parking Brake Backing Plate starts by lifting and supporting the vehicle and continues with removal of the rear wheel tire assembly followed by the rear Wheel Hub and bearing assembly. The adjuster nut should get rotated until bolt reaches a closed position before removing the shoe hold down spring and shoe assembly from the actuator by simultaneously spreading and pulling with hand force. First remove the dust cover followed by the two park brake cable bracket to knuckle mounting bolts to take off the backing plate from the knuckle. A flat bladed tool should be used to extend the actuator retaining tab for backing plate actuator removal. First install the actuator to the backing plate while extending the actuator retaining tab then connect the backing plate to the knuckle and fasten it with the two park brake cable bracket to knuckle mounting bolts which should be tightened to 60 nm (44 ft. Lbs.). To install the park brake shoe assembly first spread the shoe slightly while you pull it over the actuator assembly followed by the shoe hold down spring installation. Begin by adjusting the park brake and reinstall the rear Wheel Hub together with the bearing assembly. Proceed by reattaching the rear tire and wheel assembly and finally lower the vehicle.

OEM Cadillac STS Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Backing Plates found

View related parts
Cadillac STS Backing Plate
Part Number: 88951984
$8.25 MSRP: $12.29
You Save: $4.04 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2011 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac STS Splash Shield
Part Number: 89060204
$22.01 MSRP: $41.36
You Save: $19.35 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Cadillac STS | V | 8 Cyl 4.4 L GAS
View related parts
Cadillac STS Backing Plate
Part Number: 88951985
$11.37 MSRP: $16.91
You Save: $5.54 (33%)
Product Specifications
- Other Name: Brake Dust Shield; Plate, Brake Flange/Backing
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2011 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac STS Splash Shield
Part Number: 89060207
Product Specifications
- Other Name: Shield, Brake Flange Plate; Brake Dust Shield
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2009 Cadillac STS | V | 8 Cyl 4.4 L GAS
View related parts
Cadillac STS Backing Plate, Front Passenger Side
Part Number: 25948605
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Passenger Side
- Replaces: 89060210
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2011 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac STS Backing Plate, Front Driver Side
Part Number: 25948604
Product Specifications
- Other Name: Shield-Front Brake; Brake Dust Shield; Splash Shield; Shield, Brake Flange Plate
- Position: Front Driver Side
- Replaces: 89060209
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2011 Cadillac STS | Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

Cadillac STS Brake Backing Plate

Our website offers an extensive catalog of genuine Cadillac STS Brake Backing Plate at unbeatable prices. Every OEM Cadillac STS Brake Backing Plate comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac STS Brake Backing Plate Parts Questions & Experts Answers

Backing Plate
88951985
Q: How to replace the parking brake backing plate on Cadillac STS?
A: The procedure to change the parking Brake Backing Plate starts by lifting and supporting the vehicle and continues with removal of the rear wheel tire assembly followed by the rear Wheel Hub and bearing assembly. The adjuster nut should get rotated until bolt reaches a closed position before removing the shoe hold down spring and shoe assembly from the actuator by simultaneously spreading and pulling with hand force. First remove the dust cover followed by the two park brake cable bracket to knuckle mounting bolts to take off the backing plate from the knuckle. A flat bladed tool should be used to extend the actuator retaining tab for backing plate actuator removal. First install the actuator to the backing plate while extending the actuator retaining tab then connect the backing plate to the knuckle and fasten it with the two park brake cable bracket to knuckle mounting bolts which should be tightened to 60 nm (44 ft. Lbs.). To install the park brake shoe assembly first spread the shoe slightly while you pull it over the actuator assembly followed by the shoe hold down spring installation. Begin by adjusting the park brake and reinstall the rear Wheel Hub together with the bearing assembly. Proceed by reattaching the rear tire and wheel assembly and finally lower the vehicle.