Q: How to Service and Repair the Transmission Oil Cooler on Cadillac CTS?
A: Begin the Auxiliary Automatic Transmission (AT) Transmission Oil Cooler replacement by removing the front air deflector followed by disconnecting the inlet and outlet lines. Start by removing the auxiliary transmission oil cooler mounting bolts before taking out the auxiliary transmission oil cooler. When installing the auxiliary transmission oil cooler begin by installing the auxiliary transmission oil cooler mounting bolts then torque them to 6.5 Nm (58 inch lbs.). Reinstall the front air deflector after you connect the auxiliary transmission oil cooler outlet line to its respective inlet line. Check the transmission fluid level and look for any signs of leakage on the auxiliary transmission oil cooler.
Q: How to replace the Transmission Oil Cooler on a 6L50/6L80/6L90 automatic transmission on Cadillac Escalade?
A: To remove and replace the transmission fluid auxiliary cooler for a 6l50/6l80/6l90 automatic transmission, click to view details. Remove the auxiliary Transmission Oil Cooler bolts, and push pins, disconnect the Transmission Oil Cooler lines from the auxiliary cooler, and take the auxiliary Transmission Oil Cooler off the vehicle. For installation, reposition the auxiliary transmission oil coolers back in its' position and install the bolts and push pins to hold the Transmission Oil Cooler in position to the radiator brace by tightening the bolt to 12 n.m (9 lb ft). Next you need to reconnect the Transmission Oil Cooler lines to the auxiliary cooler and finally reinstall the front grill assembly.
Q: How to replace the auxiliary transmission oil cooler (TOC) on Cadillac XLR?
A: The first step for Transmission Oil Cooler replacement requires vehicle elevation and suspension support. First remove the wheelhouse panel while you disconnect the auxiliary lower transmission line that runs to the Transmission Oil Cooler. Take the lower Transmission Oil Cooler line and the Radiator to auxiliary Transmission Oil Cooler line off the Transmission Oil Cooler. You should remove the Transmission Oil Cooler retaining bolts followed by extracting the Transmission Oil Cooler from the vehicle. When inserting the auxiliary Transmission Oil Cooler into the vehicle position it and tighten its bolts to 25 n.m (18 lb ft). Beginning with the installation of the auxiliary Transmission Oil Cooler retaining bolts, continue the process through Radiator to Transmission Oil Cooler line installation on auxiliary Transmission Oil Cooler before attending to the lower Transmission Oil Cooler line. Once done, you can place the wheelhouse panel back into position and perform the vehicle lowering procedure while completing fluid transmission filling.