How to replace the front brake caliper bracket on Chevrolet Avalanche 1500?

Keep the brake caliper steady using heavy mechanic wire when you remove its mounting bracket while keeping the hydraulic brake hose attached. This prevents brake fluid damage to the hose. Detach the brake caliper from its holder without disconnecting the hose before removing both brake pads and anti-rattle clips from the caliper bracket. Take out the mounting bolts for the Brake Caliper Bracket and the unit itself before wiping away debris from both the inner bracket and its mounting surface. Repark the Brake Caliper Bracket in place then clean every bolt thread with denatured alcohol before applying threadlocker gm part 12345493 (Canadian part 10953488) on each thread. Fit the two caliper bracket bolts into place then tighten them to 175 nm (121 ft. Lbs.) when using 15 series or apply 300 nm (221 ft. Lbs.) for the 25 series. Replace the Brake Pad anti-rattle clips then push the pads onto the rotor before installing the brake caliper. Use a manual pump while the engine is off to bring the brake pedal to 2/3 of its range before easing off. Repeat this action to achieve a solid brake pedal response which correctly positions brake caliper pistons and pads.

OEM Chevrolet Avalanche 1500 Brake Caliper Bracket

Caliper Bracket

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Caliper Brackets found

View related parts
Chevrolet Avalanche 1500 Caliper Bracket, Rear
Part Number: 25997047
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18040099
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Mount Bracket, Rear
Part Number: 18043519
Product Specifications
- Other Name: Bracket Kit, Rear Brake Caliper; Brake Caliper Bracket; Caliper Mount; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2003 Chevrolet Avalanche 1500 | Base, North Face, On Road Edition, WBH, Z71 | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Mount Bracket
Part Number: 88982612
Product Specifications
- Other Name: Bracket, Wheel Brake Cylinder/Caliper; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Avalanche 1500 | Base, LS, LT, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Caliper Bracket, Rear
Part Number: 25997048
Product Specifications
- Other Name: Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket; Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper
- Position: Rear
- Replaces: 18040098
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Chevrolet Avalanche 1500 Brake Caliper Bracket

Our website offers an extensive catalog of genuine Chevrolet Avalanche 1500 Brake Caliper Bracket at unbeatable prices. Every OEM Chevrolet Avalanche 1500 Brake Caliper Bracket comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Avalanche 1500 Brake Caliper Bracket Parts Questions & Experts Answers

Mount Bracket
88982612
Q: How to replace the front brake caliper bracket on Chevrolet Avalanche 1500?
A: Keep the brake caliper steady using heavy mechanic wire when you remove its mounting bracket while keeping the hydraulic brake hose attached. This prevents brake fluid damage to the hose. Detach the brake caliper from its holder without disconnecting the hose before removing both Brake Pads and anti-rattle clips from the caliper bracket. Take out the mounting bolts for the Brake Caliper Bracket and the unit itself before wiping away debris from both the inner bracket and its mounting surface. Repark the Brake Caliper Bracket in place then clean every bolt thread with denatured alcohol before applying threadlocker gm part 12345493 (Canadian part 10953488) on each thread. Fit the two caliper bracket bolts into place then tighten them to 175 nm (121 ft. Lbs.) when using 15 series or apply 300 nm (221 ft. Lbs.) for the 25 series. Replace the Brake Pad anti-rattle clips then push the pads onto the rotor before installing the brake caliper. Use a manual pump while the engine is off to bring the brake pedal to 2/3 of its range before easing off. Repeat this action to achieve a solid brake pedal response which correctly positions brake caliper pistons and pads.