Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25997048
Caliper Bracket, Rear

1999-2013 GM

Customer Questions & Expert Answers (18)
GM 25997048 Caliper Bracket, Rear
  • Part Description
    Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket
  • Position
    Rear
  • Replaces
    18040098
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 25997048 Caliper Bracket, Rear is Ref No. 6 in the diagram below

    2002 Chevy Silverado 1500 Caliper Bracket, Rear Diagram for 25997048
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25997048

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2005 Chevrolet AstroBase, LS, LT6 Cyl 4.3 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25997048 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25997048 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after installing the new caliper bracket for the 2005 Chevrolet Astro? Posted by Customer
    A:
    Install the two caliper bracket mounting bolts and tighten them to 175 Nm (121 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the final step after installing the brake caliper for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Install the tire and wheel assembly, lower the vehicle, and gradually apply the brake pedal to approximately 2/3 of its travel distance, slowly release it, and repeat this process until a firm pedal is obtained.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the final step after installing the brake caliper for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the tire and wheel assembly, lower the vehicle, and gradually apply the brake pedal to approximately 2/3 of its travel distance, slowly release it, and repeat this process until a firm pedal is obtained.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be done after removing the brake caliper from the mounting bracket for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Remove the brake pads and anti-rattle clips from the bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should you do if the master cylinder reservoir needs fluid for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Fill it to the correct level with clean brake fluid if needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should you do to the caliper bracket's inside ends and mounting surface for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Clean any contaminants from them.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be done after installing the caliper bracket for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reattach the anti-rattle clips and brake pads, sliding the pads until they contact the rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    How do you install the new components for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Attach the caliper mounting bracket to the backing plate assembly, followed by the caliper itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the final step after lowering for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Pump the brake pedal slowly and firmly to seat the brake pads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be reattached after tightening the bolts for the 2005 GMC Safari? Posted by Customer
    A:
    Reattach the anti-rattle clips and brake pads, sliding the pads until they contact the rotor.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should you do after removing the C-clamp for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Take out the brake caliper bolts and carefully detach the caliper from the bracket, supporting it with heavy mechanic's wire without disconnecting the hydraulic brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be done after removing the C-clamp for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Take out the brake caliper bolts and carefully detach the caliper from the bracket, supporting it with heavy mechanic's wire without disconnecting the hydraulic brake hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be checked after attaching the caliper for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Ensure the brake caliper guide pin seals are seated properly and that the guide pins move smoothly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What should be done before securing the caliper bracket and caliper mounting bolts for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove any original adhesive, clean the bolt threads with brake parts cleaner, and apply Threadlocker GM P/N 12345493 or Red LOCTITE #272 to the threads.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    How do you reinstall the caliper onto the bracket for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the caliper onto the bracket and secure it with the brake caliper bolts, tightening them to 100 Nm (74 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the next step after tightening the bolts for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, remove safety stands, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the next step after removing the brake pads and clips for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the two brake caliper bracket mounting bolts and the brake caliper bracket itself.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Caliper Bracket, Rear 25997048 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25997048 Caliper Bracket, Rear is available in the market under the name GM Brake Caliper Bracket. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25997048 Caliper Bracket, Rear fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 25997048 maintains top performance when functioning as the Bracket Kit-Rear Brake Caliper; Brake Caliper Bracket unit at its Rear. The component 25997048 is constructed from durable material and its dimensions span 12.9 x 7.2 x 4.0 inches while weighing 5.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Mount Bracket; Caliper Mount; Caliper Support; Bracket; Bracket Kit, Wheel Brake Cylinder/Caliper. The part 25997048 has available replacement options 18040098. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.