How to replace the Pitman Arm in the steering linkage (non-rack & pinion) on Chevrolet Avalanche 1500?

The first step to replace a Pitman Arm in the steering linkage (non-rack & pinion) requires lifting and adequately supporting the vehicle. After power steering gear removal you should position it in a vise. The procedure begins with removing the Pitman Arm nut along with its washer followed by using a Pitman Arm puller (J 6632-01) or a Pitman Arm puller (J 29107-A) to separate the Pitman Arm from the pitman shaft. The new Pitman Arm should be attached to the power steering gear where installation requires the use of a fresh Pitman Arm washer and nut that must be tightened to 250 nm (184 ft. Lbs.). Follow up by moving the power steering gear from the vise, reattach it to the car, let the vehicle descend, then inspect the wheel alignment.

OEM Chevrolet Avalanche 1500 Pitman Arm

Steering Pitman Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Pitman Arms found

View related parts
Chevrolet Avalanche 1500 Idler Arm
Part Number: 19149615
$90.68 MSRP: $154.38
You Save: $63.70 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Pitman Arm
- Replaced by: 85819770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Idler Arm
Part Number: 15891516
$144.36 MSRP: $245.79
You Save: $101.43 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Steering Linkage Idler; Steering Idler Arm; Pitman Arm
- Replaced by: 19435543
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, On Road Edition, WBH, Z66 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Pitman Arm
Part Number: 12479051
$45.98 MSRP: $112.19
You Save: $66.21 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Pitman; Steering Pitman Arm; Idler Arm
- Replaced by: 85819774
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, On Road Edition, WBH, Z66 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Pitman Arm
Part Number: 12471379
$90.68 MSRP: $154.38
You Save: $63.70 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Kit, Pitman; Idler Arm
- Replaced by: 85819770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

Chevrolet Avalanche 1500 Pitman Arm

Our website offers an extensive catalog of genuine Chevrolet Avalanche 1500 Pitman Arm at unbeatable prices. Every OEM Chevrolet Avalanche 1500 Pitman Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Avalanche 1500 Pitman Arm Parts Questions & Experts Answers

Pitman Arm
12471379
Q: How to replace the Pitman Arm in the steering linkage (non-rack & pinion) on Chevrolet Avalanche 1500?
A: The first step to replace a Pitman Arm in the steering linkage (non-rack & pinion) requires lifting and adequately supporting the vehicle. After power steering gear removal you should position it in a vise. The procedure begins with removing the Pitman Arm nut along with its washer followed by using a Pitman Arm puller (J 6632-01) or a Pitman Arm puller (J 29107-A) to separate the Pitman Arm from the pitman shaft. The new Pitman Arm should be attached to the power steering gear where installation requires the use of a fresh Pitman Arm washer and nut that must be tightened to 250 nm (184 ft. Lbs.). Follow up by moving the power steering gear from the vise, reattach it to the car, let the vehicle descend, then inspect the wheel alignment.