OEM Chevrolet Avalanche 2500 Battery Cable

Chevrolet Avalanche 2500 Battery Cable Parts Questions & Experts Answers

• Negative Cable
  15321212
  Q: How to replace the positive battery cable on Chevrolet Avalanche 2500?

  A: The procedure for replacing the positive Battery Cable consists of first disconnecting the negative Battery Cable followed by unsnapping the positive Battery Cable cap and then disconnecting the positive cable while understanding the integral nature of the bolt to the Battery Cable. At the underhood bussed electrical center (UBEC) users should slowly rotate the positive cable bolt then remove the engine sight shield when necessary. The first step is to remove the positive Battery Cable from the junction block by unsnap the junction block cover while also pulling away the positive Battery Cable from the block. Vehicle owners can replace the negative cable clip with the positive cable clip on constructions with 4.8 l, 5.3 l, or 6.0 l engine types before supporting and lifting the vehicle. When the vehicle has an 8.1 l engine you should remove the negative cable clip from the positive cable clip after raising the vehicle a second time. After removing the Battery Cable channel bolt you should slide out its pin from the oil pan tab and extract the cable from the channel. The Power Steering Pump requires removal of the Battery Cable bracket bolt along with its bracket before continuing to the starter lead nut and then extracting the positive cable from the starter. The technician should disconnect the positive cable clip from the oil pan while also removing the positive Battery Cable from the system. Follow these steps to remove the positive cable from the starter for both the 8.1 l and the other engine models: begin by removing the starter lead nut from the 8.1 l engine then the positive cable from the starter, and finally take out the positive cable clip nut and cable from the engine harness clip. Gaining access to the 8.1 l engine engine harness clip involves attaching the positive Battery Cable then securing it to the harness clip. Begin by installing the 8 n.m (71 lb in) tightened positive cable clip nut before connecting the positive cable to the starter while installing and tightening the starter lead nut to 9 n.m (80 lb in). The installation of the positive Battery Cable requires installation to the oil pan clip followed by attachment to the oil pan and assembly of the positive cable clip to its location. After connecting the positive cable to the starter, tightly install the starter lead nut to 9 n.m (80 lb in). The bracket with bolt requires installation and tightening at 25 n.m (18 lb ft). The positive Battery Cable installation requires you to position the cable in the channel before inserting its pin into the oil pan tab followed by torquing the positive cable channel bolt to 12 n.m (106 lb in). During the procedure of combining negative and positive cable clips, lower the vehicle then follow the sequence of applying negative cable clips for 8.1 l engine units as well as for 4.8 l, 5.3 l, and 6.0 l engines. After inserting the positive cable into the junction block users should close the junction block cover. Reposition the engine sight shield when ready and secure the positive cable bolt on the ubec with 9 n.m (80 lb in), then attach the positive Battery Cable before securing the bolt to 17 n.m (13 lb ft). The last step involves both closing the positive Battery Cable cap while reattaching the negative Battery Cable.