ChevyParts
My Garage
My Account
Cart
OEM Chevrolet Avalanche 2500 Starter
Starter Ignition- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
7 Starters found
Chevrolet Avalanche 2500 Starter
Part Number: 89018123$296.33 MSRP: $586.32You Save: $289.99 (50%)Ships in 1-2 Business Days
Chevrolet Avalanche 2500 Starter
Part Number: 89017630$270.11 MSRP: $534.27You Save: $264.16 (50%)Ships in 1-2 Business Days
Chevrolet Avalanche 2500 Starter
Part Number: 89017844$294.17 MSRP: $646.70You Save: $352.53 (55%)Ships in 1-2 Business Days
Chevrolet Avalanche 2500 Starter
Part Number: 10465578$311.82 MSRP: $617.06You Save: $305.24 (50%)Ships in 1-2 Business Days
Chevrolet Avalanche 2500 Starter
Part Number: 10465561$211.04 MSRP: $638.21You Save: $427.17 (67%)Ships in 1-2 Business Days
Chevrolet Avalanche 2500 Starter
Our website offers an extensive catalog of genuine Chevrolet Avalanche 2500 Starter at unbeatable prices. Every OEM Chevrolet Avalanche 2500 Starter comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Avalanche 2500 Starter Parts Questions & Experts Answers
- Q: How to replace the starter motor on Chevrolet Avalanche 2500?A: Begin fixture replacement of the Starter motor by starting with negative Battery Cable disconnect and appropriate vehicle elevation. 4wd models require users to first remove front axle mounting bracket nuts before shifting the front axle mounting bracket bolt until it rests against the support bushing without unfastening this bolt. The Starter motor bolts must be taken off next while gently moving the Starter forward past the transmission area. You need to disconnect the Starter lead through two steps which involve unfastening the Starter lead nut and the positive cable nut before separating the positive cable from the Starter. You can remove the Starter heat shield by unfastening all bolts and the nut and removing the shield. The Starter heat shield installation should include bolt attachment with the nut and bolt tightening at 3 n.m (35 lb in) for the bolts and 5 n.m (44 lb in) for the nut. Secure the Starter with the positive cable through its nut by tightening it to 9 n.m (80 lb in). Secure the Starter lead by placing its nut tight enough to reach 3.4 n.m (30 lb in). Install the Starter while placing its bolts and torque these bolts to achieve 50 n.m (37 lb ft). Place the completely seated front axle mounting bracket bolt before installing its nuts and tightening both to 95 n.m (70 lb ft). Lower the vehicle before reattaching the negative Battery Cable as the last step.
