Make sure this part fits

GM 19117211
Positive Cable

2006-2007 GM

Customer Questions & Expert Answers (15)
GM 19117211 Positive Cable
  • Part Description
    Cable
  • Replaces
    15137041, 15288538, 15833801
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006 Cadillac EscaladeBase8 Cyl 6.0 L GAS
    2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2006 Chevrolet Avalanche 1500LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2006 Chevrolet Avalanche 2500LS, LT8 Cyl 8.1 L GAS
    2006 Chevrolet Silverado 1500Hybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2006 Chevrolet Silverado 1500 HDLT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2006 Chevrolet Silverado 2500 HDLS, LT, WT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19117211 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19117211 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What additional steps are required for a 4.8L, 5.3L, or 6.0L engine for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Remove the battery cable bracket bolt and bracket from the power steering pump, and disconnect the accessory power fuse block front wiring harness electrical connector from the negative cable connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be removed after disconnecting the auxiliary battery negative cable for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the engine sight shield and the engine wiring harness/auxiliary negative battery cable bolt, then take out the auxiliary negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What specific steps should be followed for the 8.1L engine after raising it for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Remove the engine wiring harness ground/negative cable bolt and reposition the wiring harness ground and negative cables. Then, remove the forward lamp wiring harness ground/negative cable bolt, lower the vehicle, and remove the negative battery cable.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the first step in the installation process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the auxiliary battery positive cable, ensuring to adhere to the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What steps are specific to 8.1L engines regarding the battery cable for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Remove the starter lead nut and the positive cable from the starter, then remove the positive cable clip nut and detach the positive cable from the engine harness clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    How do you install the positive battery cable for the 8.1L engine for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the positive battery cable, attach it to the engine harness clip, install the positive cable clip nut, and tighten it to 8 N.m (71 lb in). Then connect the positive cable to the starter and tighten the starter lead nut to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after securing the positive cable to the channel for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reconnect the negative cable to the battery channel, lower the vehicle, and install the battery cable bracket and bolt to the power steering pump, tightening the bolt to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be removed after disconnecting the negative cable for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the auxiliary positive battery cable nut, then detach the auxiliary positive battery cable from the auxiliary relay and the battery tray clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the next step after detaching the cable for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Raise and support the vehicle, then take out the auxiliary cable clip bolt from the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after installing the negative battery cable for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Re-set the customer's radio stations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the next step after removing the cable from the battery for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Loosen the positive cable bolt at the underhood bussed electrical center (UBEC), unsnap the junction block cover, and remove the positive battery cable from the junction block.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What should be done after replacing the mega fuse cover for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Reconnect the positive battery cable connector to the UBEC.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the next step after removing the negative battery cable for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Raise and support the vehicle, then remove the forward lamp wiring harness ground bolt and the forward lamp wiring harness terminal from the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    Q:
    What is the next step after raising and supporting the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the engine wiring harness ground/negative battery cable bolt and the negative battery cable from the battery cable clip.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Battery Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Positive Cable 19117211 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19117211 Positive Cable is available in the market under the name GM Battery Cable. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19117211 Positive Cable fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 19117211 maintains top performance when functioning as the Cable unit. The component 19117211 is constructed from durable material and its dimensions span 69.5 x 12.6 x 13.5 inches while weighing 14.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Cable, Battery Negative And Engine Ground; Cable, Battery(Positive). The part 19117211 has available replacement options 15137041, 15288538, 15833801. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.