How to replace the rear axle shaft on Chevrolet Camaro?

Adhering to replace a rear Axle Shaft it is essential to first lift and support the vehicle. First remove the rear tire wheel assembly and then proceed with removing the brake rotor and housing cover of the rear axle. The rear speed sensor reluctor wheel requires the installation of j 39446 abs exciter ring protector kit (J 39446) when non-traction control axles are present. The first step requires removing the differential case lock bolt from the pinion gear shaft before taking out the pinion gear itself. Insert the flanged end of the Axle Shaft into the rear axle housing to get access to the rear Axle Shaft lock then remove the lock while being cautious of not harming the rear wheel speed sensor reluctor wheel that is attached to the Axle Shaft. A replacement of the rear Axle Shaft should happen if the reluctor wheel suffers damage. Pull out the rear Axle Shaft from inside its housing of the rear axle. The process of installation requires inserting the rear Axle Shaft inside the housing so the splines will both avoid the wheel bearing seal damage and connect to the differential side gear splines. To properly install the rear Axle Shaft lock push the Axle Shaft toward the exterior while letting it rest into the differential side gear counterbore. Install the pinion gear shaft through the differential case while adding pinion gear thrust washers and pinion gears. Position the hole on the pinion gear shaft straight with the rear Axle Shaft lock bolt/screw opening found in the differential case. Prior to installing and tightening the pinion gear shaft lock bolt to 36 nm (27 ft. Lbs.), clean its threads and apply threadlocker gm us p/n 12345382 canada p/n 10953489 or equivalent. Standard rear axle vehicles should have the j 39446 removed from the speed sensor reluctor wheel followed by disposal of any new reluctor wheel plastic cover. Reposition the rear axle housing cover followed by rear brake rotor after which install rear tire and wheel assembly before lowering the vehicle.

OEM Chevrolet Camaro Axle Shaft

Car Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

38 Axle Shafts found

View related parts
Chevrolet Camaro Axle Assembly, Rear Passenger Side
Part Number: 84855965
$189.03 MSRP: $297.42
You Save: $108.39 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; Axle Shaft
- Position: Rear Passenger Side
- Replaces: 22972609, 84550234, 84309454, 84800790
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Axle Assembly, Rear Driver Side
Part Number: 84855962
$231.38 MSRP: $364.07
You Save: $132.69 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive
- Position: Rear Driver Side
- Replaces: 22972606, 84309451, 84800787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Axle Assembly, Rear Driver Side
Part Number: 22806795
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; Axle Shaft; Shaft, Rear Axle Drive
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Axle Assembly, Rear Passenger Side
Part Number: 22813174
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft, Rear Axle Drive
- Position: Rear Passenger Side
- Replaces: 92238376
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Axle Assembly, Rear Driver Side
Part Number: 22813177
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft, Rear Axle Drive
- Position: Rear Driver Side
- Replaces: 92246759
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Axle Assembly, Rear Driver Side
Part Number: 22813173
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft, Rear Axle Drive
- Position: Rear Driver Side
- Replaces: 92238375
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Axle Assembly, Rear Passenger Side
Part Number: 22813178
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; CV Axle Assembly; Axle Shaft; CV Axle; Shaft, Rear Axle Drive
- Position: Rear Passenger Side
- Replaces: 92246760
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Axle Shaft, Rear
Part Number: 22515440
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, Sport, Z28 | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Shaft, Rear Driver Side
Part Number: 10033571
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1992 Chevrolet Camaro | Base, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Shaft, Rear Passenger Side
Part Number: 10033572
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1992 Chevrolet Camaro | Base, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Shaft, Rear
Part Number: 26063144
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Replaces: 26044963
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Camaro | Base, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Shaft
Part Number: 22515441
Product Specifications
- Other Name: Shaft-Axle (F) (Drum); Axle Shafts; Shaft, Rear Axle Drive
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, Sport, Z28 | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Shaft, Rear
Part Number: 26063146
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Replaces: 26027589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Shaft, Rear
Part Number: 26034018
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Replaces: 26028692, 26031252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1992 Chevrolet Camaro | Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Shaft, Rear
Part Number: 26059972
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Assembly, Rear Passenger Side
Part Number: 22806796
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; Axle Shaft; Shaft, Rear Axle Drive
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Axle Assembly, Rear Passenger Side
Part Number: 22813175
Product Specifications
- Other Name: Shaft, Rear Axle Drive; CV Axle Assembly; Axle Shaft; CV Axle
- Position: Rear Passenger Side
- Replaces: 92238378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Axle Shaft, Rear
Part Number: 26027588
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1996 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Shaft, Rear
Part Number: 26059962
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Axle Assembly, Rear Driver Side
Part Number: 84372865
$361.42 MSRP: $568.67
You Save: $207.25 (37%)
Product Specifications
- Other Name: Shaft Assembly-Rear Wheel Drive; Axle Shaft
- Position: Rear Driver Side
- Replaced by: 85641092
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS

| Page 1 of 2 |Next >

1-20 of 38 Results

Chevrolet Camaro Axle Shaft

Our website offers an extensive catalog of genuine Chevrolet Camaro Axle Shaft at unbeatable prices. Every OEM Chevrolet Camaro Axle Shaft comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Camaro Axle Shaft Parts Questions & Experts Answers

Axle Shaft, Rear
26059962
Q: How to replace the rear axle shaft on Chevrolet Camaro?
A: Adhering to replace a rear Axle Shaft it is essential to first lift and support the vehicle. First remove the rear tire wheel assembly and then proceed with removing the brake rotor and housing cover of the rear axle. The rear speed sensor reluctor wheel requires the installation of j 39446 abs exciter ring protector kit (J 39446) when non-traction control axles are present. The first step requires removing the differential case lock bolt from the pinion gear shaft before taking out the pinion gear itself. Insert the flanged end of the Axle Shaft into the rear axle housing to get access to the rear Axle Shaft lock then remove the lock while being cautious of not harming the rear wheel speed sensor reluctor wheel that is attached to the Axle Shaft. A replacement of the rear Axle Shaft should happen if the reluctor wheel suffers damage. Pull out the rear Axle Shaft from inside its housing of the rear axle. The process of installation requires inserting the rear Axle Shaft inside the housing so the splines will both avoid the wheel bearing seal damage and connect to the differential side gear splines. To properly install the rear Axle Shaft lock push the Axle Shaft toward the exterior while letting it rest into the differential side gear counterbore. Install the pinion gear shaft through the differential case while adding pinion gear thrust washers and pinion gears. Position the hole on the pinion gear shaft straight with the rear Axle Shaft lock bolt/screw opening found in the differential case. Prior to installing and tightening the pinion gear shaft lock bolt to 36 nm (27 ft. Lbs.), clean its threads and apply threadlocker gm us p/n 12345382 canada p/n 10953489 or equivalent. Standard rear axle vehicles should have the j 39446 removed from the speed sensor reluctor wheel followed by disposal of any new reluctor wheel plastic cover. Reposition the rear axle housing cover followed by rear brake rotor after which install rear tire and wheel assembly before lowering the vehicle.