Other Name: Sensor Kit, Fuel Tank Meter/Pump; Fuel Tank Pressure Sensor; Level Sensor; Tank Pressure Sensor; Sensor; Sensor, Early Fuel Evaporation; Sensor, Fuel Tank Meter/Pump
Position: Passenger Side
Replaces: 13502510
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2010-2022 Chevrolet Camaro | LS, LT, LT1, SS, Z/28, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Other Name: Sensor Assembly-Fuel Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Sensor; Tank Pressure Sensor; Sensor, Computer Control Sensors; Sensor, Fuel Tank Meter/Pump
Replaces: 13579380
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2013-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
Other Name: Sensor Assembly-Fuel Pressure; Sensor, Computer Control Sensors; Sensor, Fuel Tank Meter/Pump
Replaces: 92206031
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2010-2012 Chevrolet Camaro | LS, LT, SS, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
Chevrolet Camaro Fuel Pressure Sensor
Our website offers an extensive catalog of genuine Chevrolet Camaro Fuel Pressure Sensor at unbeatable prices. Every OEM Chevrolet Camaro Fuel Pressure Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Camaro Fuel Pressure Sensor Parts Questions & Experts Answers
Q: How to replace the fuel pressure sensor in the fuel injection fuel rail on Chevrolet Camaro?
A: You need to empty fuel system pressure before starting the Fuel Pressure Sensor replacement operation in the fuel injection Fuel Rail. The replacement of the Fuel Pressure Sensor in the fuel injection Fuel Rail begins by removing both the cross vehicle brace together with the Intake Manifold followed by extraction of the foam insulator from the fuel rails. Do not place any force directly on the plastic sensor housing but apply force only on the hexagon components attached to it. A 27 mm socket allows safe removal of the Fuel Pressure Sensor from the fuel injection Fuel Rail . Discard this sensor when it is removed. Let all fuel drain out from the Fuel Rail and sensor location while using a lint-free cloth to dry the sealing cone in the Fuel Rail along with the sensor joint area. Check the sealing cone for absence of fuel while inspecting it for debris and burrs. Silicon-free engine oil gm p/n 12345610 (Canadian P/N 993193) or its equivalent should be used to lubricate threads and sealing cone areas in both the Fuel Rail and new fuel injection Fuel Rail Fuel Pressure Sensor. The new Fuel Pressure Sensor should be torqued to the fuel injection Fuel Rail with low force before removal for reapplication of earlier instructed lubrication steps. Fasten the new Fuel Pressure Sensor to the fuel injection Fuel Rail by torquing it to 33 nm (25 lb ft). Replace the foam insulator along with the Intake Manifold. A faulty Fuel Rail demands complete replacement when fuel leakage happens at this location. Before inspecting for leaks turn the ignition on with the engine off for 2 seconds, wait 10 seconds for the ignition off state followed by turning on the ignition with the engine off before inspecting for leakage. As a final step replace the cross vehicle brace installation.