How to replace the outer tie rod end on Chevrolet Cavalier?

Start replacement of the outer Tie Rod End by using the j 24319-b (J 24319-B) universal steering linkage puller to divide all tie rod ends from each other. Start the procedure by removing the front tire with wheel while you take off the outer tie rod ball stud nut and loosen its jam nut . The j 24319-b (J 24319-B) universal steering linkage puller should be used for removing the outer tie rod ball stud from the Steering Knuckle. Proceed with checking the inner tie rod shaft for bending or damaged threads after removing the Tie Rod End from it. Proceed with installation only after cleaning the tapered surface of the Steering Knuckle. Insert the new Tie Rod End to the inner tie rod shaft before installing the outer tie rod ball stud onto the Steering Knuckle. New prevailing torque nut should be used to fasten the outer tie rod ball stud to the Steering Knuckle with a torque setting at 45 n.m (33 lb ft). The service procedure includes installing the front tire together with the wheel then adjusting the front toe followed by tightening the jam nut until it reaches 75 n.m (55 lb ft).

OEM Chevrolet Cavalier Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tie Rod Ends found

View related parts
Chevrolet Cavalier Tie Rod, Outer
Part Number: 26045051
$72.00 MSRP: $117.84
You Save: $45.84 (39%)
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Outer Tie Rod; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 7849349, 07849349
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1994 Chevrolet Cavalier | Base, CL, CS, Olympic, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Outer Tie Rod
Part Number: 26057931
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 26033527
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Cavalier | Base, LS, LS Sport, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Tie Rod, Outer
Part Number: 26045049
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Outer Tie Rod; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 07849350, 7849350
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1994 Chevrolet Cavalier | Base, CL, CS, Olympic, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS

Chevrolet Cavalier Tie Rod End

Our website offers an extensive catalog of genuine Chevrolet Cavalier Tie Rod End at unbeatable prices. Every OEM Chevrolet Cavalier Tie Rod End comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cavalier Tie Rod End Parts Questions & Experts Answers

Outer Tie Rod
26057931
Q: How to replace the outer tie rod end on Chevrolet Cavalier?
A: Start replacement of the outer Tie Rod End by using the j 24319-b (J 24319-B) universal steering linkage puller to divide all tie rod ends from each other. Start the procedure by removing the front tire with wheel while you take off the outer tie rod ball stud nut and loosen its jam nut . The j 24319-b (J 24319-B) universal steering linkage puller should be used for removing the outer tie rod ball stud from the Steering Knuckle. Proceed with checking the inner tie rod shaft for bending or damaged threads after removing the Tie Rod End from it. Proceed with installation only after cleaning the tapered surface of the Steering Knuckle. Insert the new Tie Rod End to the inner tie rod shaft before installing the outer tie rod ball stud onto the Steering Knuckle. New prevailing torque nut should be used to fasten the outer tie rod ball stud to the Steering Knuckle with a torque setting at 45 n.m (33 lb ft). The service procedure includes installing the front tire together with the wheel then adjusting the front toe followed by tightening the jam nut until it reaches 75 n.m (55 lb ft).