How to replace the multifunction turn signal switch on Chevrolet Classic?

First turn off sir before you remove the Steering Column multifunction switch mounting screw and take the switch off its position. Take the electrical connections off the multifunction switch unit. Join the electrical cables to the multifunction switch and secure it onto the Steering Column by letting the spring-loaded horn pin sink into place. Fix the mounting screw into the multifunction switch and tighten it to 4 nm torque setting. Set the sir system active and test if the multifunction switch works properly.

OEM Chevrolet Classic Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
Chevrolet Classic Multifunction Switch
Part Number: 19244094
$21.57 MSRP: $32.11
You Save: $10.54 (33%)
Product Specifications
- Other Name: Switch Assembly, Turn Signal, Headlamp, Wiper & Washer; Multi Purpose Combination Switch; Switch, Headlamp/Fog Lamp/Turn Signal; Windshield Wiper Control; Turn Signal Lamp; Headlamp Dimmer
- Replaces: 22661036, 22602262, 22676853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS

Chevrolet Classic Turn Signal Switch

Our website offers an extensive catalog of genuine Chevrolet Classic Turn Signal Switch at unbeatable prices. Every OEM Chevrolet Classic Turn Signal Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Classic Turn Signal Switch Parts Questions & Experts Answers

Multifunction Switch
19244094
Q: How to replace the multifunction turn signal switch on Chevrolet Classic?
A: First turn off sir before you remove the Steering Column multifunction switch mounting screw and take the switch off its position. Take the electrical connections off the multifunction switch unit. Join the electrical cables to the multifunction switch and secure it onto the Steering Column by letting the spring-loaded horn pin sink into place. Fix the mounting screw into the multifunction switch and tighten it to 4 nm torque setting. Set the sir system active and test if the multifunction switch works properly.