Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2008-2010 Chevrolet Cobalt | Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
Chevrolet Cobalt TPMS Sensor
Our website offers an extensive catalog of genuine Chevrolet Cobalt TPMS Sensor at unbeatable prices. Every OEM Chevrolet Cobalt TPMS Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Cobalt TPMS Sensor Parts Questions & Experts Answers
Q: How to replace the TPMS Sensor on Chevrolet Cobalt?
A: First, lift the vehicle on an appropriate support to replace the Tire Pressure Indicator Sensor. Take the tire off the wheel and also remove the tire/wheel assembly off the vehicle. Replace damaged components of tire pressure sensors. After that, take off the tire pressure sensor indicator-cap and after deflating the tire, remove the tire pressure sensor indicator nut. While removing the tire pressure sensor, the seal should not be reused. Instead, I will take it out and replace it with a new one. You should remove the tire pressure sensor, the washer, and tire pressure sensor. For installation clean the area around the mounting point for the tire pressure sensor then install the washer and the seal on the tire pressure sensor. Mount the tire pressure sensor on the wheel and hand-start the nut with the sensor roughly parallel on the inside wheel, while torquing. Mount the nut on the tire pressure sensor, and tighten it up to 7 Nm (62 lb in). Next, put the tire on the wheel and then the tire/wheel mount on the vehicle. Finally, lower the vehicle and learn the tire pressure sensors.